DESTROYING BOULDERS / DIRECT RESPONSE EDITION M03
Ask the
full system.
Keep the same specimen and frequency grid. Solve the full discrete equations at every point. Then compare the meshes without a retained-mode approximation.
Research direction: Ashley Kalkowski.
Numerical resolution study · no physical tests.
322 current direct points completed · broad-band accuracy unresolved.
Read the direct-grid comparisonSAME STEEL / SAME LOAD / SAME FREQUENCIES
Two meshes. One fixed question.
How different are their directly calculated responses?
n106,000 tetrahedra
3,630 free displacement DOFs
n1210,368 tetrahedra
6,084 free displacement DOFs
161 original frequencies per mesh
20,000–200,000 Hz
322 completed, numerically valid points
FULL DISCRETE SYSTEM ≠ CONTINUUM OR PHYSICAL TRUTH
Spatial, damping and boundary assumptions still apply.
20 mmUnchanged cube side length
1 NPrescribed top-face force · peak
161Original frequency samples per mesh
0Physical or fracture tests
01 / REMOVE ONE APPROXIMATION
Direct mesh difference.
Across the original grid.
M02 compared spatial resolutions at a fixed 144-mode cutoff. That difference still contained modal truncation. M03 uses direct discrete solves at every original grid frequency to remove that reduction from the comparison.
The full-grid direct comparison fails the 5% screen.The largest scaled complex-compliance difference is 165.281% between n10 and n12. The same-mesh 144-mode comparisons also fail: 10.014% on n10 and 9.842% on n12. All 322 computations passed their numerical validity checks; that does not make their discretization sufficiently accurate.
These percentages describe scaled differences in complex response. They are not energy efficiency, fracture probability, device performance, strength or a bound on continuous-frequency peaks.
Frozen revision 2 outcomes; each declared screen uses a 5% threshold| Quantity | Comparison scope | Value and worst sampled frequency | Status |
|---|
| Direct complex compliance | n10 versus n12, all 161 original samples | 165.281% at 131.759 kHz | FAILED |
|---|
| 144 modes versus direct / n10 | Same mesh; complex scalar compliance | 10.014% at 200.000 kHz | FAILED |
|---|
| 144 modes versus direct / n12 | Same mesh; complex scalar compliance | 9.842% at 200.000 kHz | FAILED |
|---|
| Direct compliance at 20 kHz | One predeclared sample; n10 versus n12 | 0.147% at 20.000 kHz | PASSED |
|---|
| Volume/time RMS stress at 20 kHz | One predeclared sample; n10 versus n12 | 0.211% at 20.000 kHz | PASSED |
|---|
A difference between two direct finite-element meshes is a numerical comparison, not a measured error against the real specimen. A maximum on 161 frequencies is not a bound on response peaks between those samples. The two passing 20 kHz checks apply to that one sample, not a contiguous frequency band. No whole-grid stress acceptance criterion was declared.
Read the denominator.
For each mesh, Sn(f) = max(|Hd,n(f)|, 0.01 maxf|Hd,n|). The direct mesh comparison uses S12; each modal/direct comparison uses that mesh’s own direct Sn. This floor prevents near-zero compliance from dominating through an arbitrarily tiny denominator.
A complex identity, not additive shares.
M = D + E10 − E12, where D is the direct mesh difference and E is each mesh’s modal-reduction difference. Panel four uses S12 for every term. Its 165.406% modal-mesh maximum is distinct from M02’s historical 155.515% value, which used the modal n12 denominator. The magnitudes cannot be added as causal percentages.
02 / KEEP THE BOUNDARIES VISIBLE
What is applied.
What remains assumed.
The specimen is the same idealized three-dimensional steel cube. This edition changes the numerical route to its harmonic response; it does not add a fracture law or a working delivery device.
APPLIED MODEL INPUTA prescribed interface force.
Uniform top-face traction has a 1 N peak resultant. The bottom face is fixed in all three displacement components. The harmonic load alternates sign, so a physical interface would need to transmit the appropriate push and pull.
MATERIAL / LOSSUnchanged linear steel.
Young’s modulus 210 GPa, density 7,850 kg/m³ and Poisson’s ratio 0.30. The inherited Rayleigh damping is illustrative and unmeasured. No plasticity, damage, hardness, flaws or crack propagation is modeled.
ENERGY BOUNDARYOnly the ideal specimen boundary.
Any computed work or power refers to this prescribed mechanical loading. The electrical input, actuator losses, attachment and acoustic transmission are outside the model. Whole-device efficiency cannot be inferred.
Direct does not mean transient.
The calculation concerns steady harmonic response. It does not simulate switching the drive on, a timed impact sequence, crack formation or energy accumulation during a real startup.
The hardware studies remain context.
E01 assemblies and EL01 wiring and parts remain available. They have not been shown to deliver this 20–200 kHz prescribed force. No new hardware actuation or calibration occurs in M03.
Method background: COMSOL documents selected-eigenmode superposition; Ansys describes full direct harmonic equations and the steady-state scope. These are explanatory references. This project’s results come from its own published implementation, not those commercial solvers.
03 / PRESERVE THE EXECUTION HISTORY
An interrupted run.
A separately documented repair.
A controller file-update error stopped the first attempt. Its retained points remain part of the record, and its missing points are not silently filled from another run.
ATTEMPT 1 / PRESERVED233 valid points. 89 unrun.
The controller encountered a Windows file-access error while replacing its progress record. Four selected full fields had been saved. The partial review reconstructed those four fields and checked the 233 retained scalar records; it performed zero separate direct reference solves.
Whole-grid accuracy screens were not evaluated. This execution failure does not establish numerical instability or specimen failure.
REVISION 2 / COMPLETED SEPARATELYFile handling repaired. Accuracy failure retained.
The separately frozen revision completed all 322 points, with zero invalid or unrun points and all six inherited anchor replays passing. The specimen, grid, force, scientific equations and accuracy criteria stayed unchanged. The I/O repair added bounded retry handling for mutable progress metadata; immutable result records were retained separately.
The 233 earlier points are repeated conditions in the history, not 233 extra independent frequencies or specimens. Revision 2’s complete results do not fill or alter the original partial attempt.
Public failure documentation removes only private absolute filesystem paths, with the transformation bound to the original record hashes. The private originals are retained. The history package preserves all 233 original scalar reports and four original fields. A pre-execution status-enum documentation gap was clarified; it was not a failed numerical preflight. The final repaired preflight passed 21 tests.
04 / RETAIN THE WHOLE GRID
Every declared point.
Including failures.
The final record distinguishes completed computations, numerical validity and accuracy outcomes. Every original frequency remains visible, including the samples with large discrepancies.
322 / 322 current points are numerically valid. All three whole-grid scalar accuracy screens fail.Each mesh contributes 161 direct harmonic solutions. Six selected full displacement fields are retained at indices 0, 80 and 160 on both meshes. The other 316 current full fields were computed but not retained; their scalar records remain available. There are zero new eigensolutions, zero time-domain integrations and zero physical tests in this matrix.
The independent review passed 999 checks across all 322 scalar/report records, reconstructs the six retained fields, and separately solves the two midpoint reference cases. It is a separate implementation within this project, sharing NumPy/SciPy; not an outside laboratory or physical validation. These are different coverage levels, not independent re-solves of all 322 points. The review and its public-core replay are linked below.
Inspect all 161 frequency rows (322 current direct solutions)
Both mesh statuses are completed_valid on every displayed row. Values below are rounded for reading; the CSVs retain the original values. H is complex compliance; only its magnitude is shown in the first two response columns. Error columns include phase through complex differences.
Original frequency grid, not selected peaks. Percent differences use the declared direct normalizers.| Index | kHz | |Hd10| m/N | |Hd12| m/N | Direct mesh % | n10 modal/direct % | n12 modal/direct % |
|---|
| 0 | 20.000 | 2.4890e-10 | 2.4926e-10 | 0.147 | 5.317 | 5.657 |
|---|
| 1 | 20.290 | 2.4952e-10 | 2.4989e-10 | 0.148 | 5.304 | 5.644 |
|---|
| 2 | 20.584 | 2.5016e-10 | 2.5053e-10 | 0.148 | 5.291 | 5.629 |
|---|
| 3 | 20.882 | 2.5082e-10 | 2.5119e-10 | 0.149 | 5.277 | 5.614 |
|---|
| 4 | 21.185 | 2.5151e-10 | 2.5188e-10 | 0.149 | 5.263 | 5.599 |
|---|
| 5 | 21.492 | 2.5222e-10 | 2.5260e-10 | 0.150 | 5.248 | 5.584 |
|---|
| 6 | 21.804 | 2.5296e-10 | 2.5334e-10 | 0.151 | 5.233 | 5.568 |
|---|
| 7 | 22.120 | 2.5372e-10 | 2.5411e-10 | 0.151 | 5.217 | 5.551 |
|---|
| 8 | 22.440 | 2.5452e-10 | 2.5490e-10 | 0.152 | 5.201 | 5.534 |
|---|
| 9 | 22.766 | 2.5534e-10 | 2.5573e-10 | 0.153 | 5.184 | 5.516 |
|---|
| 10 | 23.096 | 2.5619e-10 | 2.5659e-10 | 0.154 | 5.167 | 5.498 |
|---|
| 11 | 23.430 | 2.5708e-10 | 2.5747e-10 | 0.154 | 5.150 | 5.479 |
|---|
| 12 | 23.770 | 2.5800e-10 | 2.5840e-10 | 0.155 | 5.132 | 5.460 |
|---|
| 13 | 24.115 | 2.5895e-10 | 2.5935e-10 | 0.156 | 5.113 | 5.440 |
|---|
| 14 | 24.464 | 2.5994e-10 | 2.6035e-10 | 0.156 | 5.094 | 5.419 |
|---|
| 15 | 24.819 | 2.6097e-10 | 2.6138e-10 | 0.157 | 5.074 | 5.398 |
|---|
| 16 | 25.179 | 2.6204e-10 | 2.6245e-10 | 0.157 | 5.053 | 5.376 |
|---|
| 17 | 25.543 | 2.6316e-10 | 2.6357e-10 | 0.157 | 5.032 | 5.354 |
|---|
| 18 | 25.914 | 2.6432e-10 | 2.6474e-10 | 0.157 | 5.010 | 5.331 |
|---|
| 19 | 26.289 | 2.6553e-10 | 2.6595e-10 | 0.157 | 4.988 | 5.307 |
|---|
| 20 | 26.670 | 2.6680e-10 | 2.6722e-10 | 0.156 | 4.964 | 5.282 |
|---|
| 21 | 27.057 | 2.6813e-10 | 2.6855e-10 | 0.154 | 4.940 | 5.256 |
|---|
| 22 | 27.449 | 2.6956e-10 | 2.6997e-10 | 0.152 | 4.914 | 5.228 |
|---|
| 23 | 27.847 | 2.7112e-10 | 2.7149e-10 | 0.137 | 4.886 | 5.199 |
|---|
| 24 | 28.251 | 2.7221e-10 | 2.7237e-10 | 0.252 | 4.866 | 5.183 |
|---|
| 25 | 28.660 | 2.7327e-10 | 2.7400e-10 | 0.273 | 4.848 | 5.152 |
|---|
| 26 | 29.076 | 2.7503e-10 | 2.7567e-10 | 0.232 | 4.817 | 5.121 |
|---|
| 27 | 29.497 | 2.7677e-10 | 2.7737e-10 | 0.217 | 4.787 | 5.090 |
|---|
| 28 | 29.925 | 2.7854e-10 | 2.7913e-10 | 0.211 | 4.757 | 5.059 |
|---|
| 29 | 30.358 | 2.8037e-10 | 2.8095e-10 | 0.208 | 4.726 | 5.026 |
|---|
| 30 | 30.799 | 2.8227e-10 | 2.8286e-10 | 0.208 | 4.695 | 4.993 |
|---|
| 31 | 31.245 | 2.8426e-10 | 2.8485e-10 | 0.208 | 4.662 | 4.958 |
|---|
| 32 | 31.698 | 2.8633e-10 | 2.8693e-10 | 0.209 | 4.629 | 4.922 |
|---|
| 33 | 32.157 | 2.8850e-10 | 2.8911e-10 | 0.211 | 4.594 | 4.886 |
|---|
| 34 | 32.623 | 2.9077e-10 | 2.9139e-10 | 0.213 | 4.559 | 4.848 |
|---|
| 35 | 33.096 | 2.9315e-10 | 2.9378e-10 | 0.215 | 4.522 | 4.809 |
|---|
| 36 | 33.576 | 2.9564e-10 | 2.9628e-10 | 0.218 | 4.484 | 4.769 |
|---|
| 37 | 34.063 | 2.9825e-10 | 2.9891e-10 | 0.221 | 4.446 | 4.727 |
|---|
| 38 | 34.557 | 3.0100e-10 | 3.0167e-10 | 0.224 | 4.405 | 4.684 |
|---|
| 39 | 35.057 | 3.0388e-10 | 3.0458e-10 | 0.228 | 4.364 | 4.640 |
|---|
| 40 | 35.566 | 3.0692e-10 | 3.0764e-10 | 0.232 | 4.321 | 4.594 |
|---|
| 41 | 36.081 | 3.1012e-10 | 3.1085e-10 | 0.236 | 4.277 | 4.547 |
|---|
| 42 | 36.604 | 3.1349e-10 | 3.1425e-10 | 0.241 | 4.231 | 4.499 |
|---|
| 43 | 37.135 | 3.1705e-10 | 3.1783e-10 | 0.246 | 4.184 | 4.448 |
|---|
| 44 | 37.673 | 3.2081e-10 | 3.2162e-10 | 0.251 | 4.136 | 4.396 |
|---|
| 45 | 38.219 | 3.2479e-10 | 3.2562e-10 | 0.256 | 4.085 | 4.343 |
|---|
| 46 | 38.773 | 3.2899e-10 | 3.2986e-10 | 0.262 | 4.034 | 4.287 |
|---|
| 47 | 39.335 | 3.3346e-10 | 3.3436e-10 | 0.269 | 3.980 | 4.230 |
|---|
| 48 | 39.905 | 3.3820e-10 | 3.3913e-10 | 0.276 | 3.925 | 4.171 |
|---|
| 49 | 40.484 | 3.4323e-10 | 3.4421e-10 | 0.283 | 3.867 | 4.110 |
|---|
| 50 | 41.071 | 3.4860e-10 | 3.4962e-10 | 0.291 | 3.808 | 4.047 |
|---|
| 51 | 41.666 | 3.5432e-10 | 3.5539e-10 | 0.300 | 3.747 | 3.982 |
|---|
| 52 | 42.270 | 3.6044e-10 | 3.6155e-10 | 0.310 | 3.684 | 3.915 |
|---|
| 53 | 42.882 | 3.6698e-10 | 3.6816e-10 | 0.320 | 3.619 | 3.845 |
|---|
| 54 | 43.504 | 3.7400e-10 | 3.7524e-10 | 0.331 | 3.552 | 3.773 |
|---|
| 55 | 44.135 | 3.8154e-10 | 3.8286e-10 | 0.343 | 3.482 | 3.698 |
|---|
| 56 | 44.774 | 3.8967e-10 | 3.9106e-10 | 0.356 | 3.410 | 3.621 |
|---|
| 57 | 45.423 | 3.9845e-10 | 3.9993e-10 | 0.370 | 3.335 | 3.541 |
|---|
| 58 | 46.082 | 4.0796e-10 | 4.0953e-10 | 0.385 | 3.258 | 3.459 |
|---|
| 59 | 46.750 | 4.1828e-10 | 4.1997e-10 | 0.402 | 3.178 | 3.374 |
|---|
| 60 | 47.427 | 4.2952e-10 | 4.3134e-10 | 0.421 | 3.095 | 3.285 |
|---|
| 61 | 48.115 | 4.4182e-10 | 4.4378e-10 | 0.442 | 3.010 | 3.194 |
|---|
| 62 | 48.812 | 4.5531e-10 | 4.5743e-10 | 0.465 | 2.921 | 3.099 |
|---|
| 63 | 49.520 | 4.7017e-10 | 4.7249e-10 | 0.490 | 2.829 | 3.001 |
|---|
| 64 | 50.238 | 4.8662e-10 | 4.8916e-10 | 0.519 | 2.734 | 2.899 |
|---|
| 65 | 50.966 | 5.0492e-10 | 5.0772e-10 | 0.551 | 2.635 | 2.794 |
|---|
| 66 | 51.705 | 5.2539e-10 | 5.2849e-10 | 0.587 | 2.533 | 2.684 |
|---|
| 67 | 52.454 | 5.4844e-10 | 5.5190e-10 | 0.628 | 2.427 | 2.571 |
|---|
| 68 | 53.215 | 5.7456e-10 | 5.7846e-10 | 0.675 | 2.317 | 2.453 |
|---|
| 69 | 53.986 | 6.0441e-10 | 6.0885e-10 | 0.729 | 2.203 | 2.331 |
|---|
| 70 | 54.768 | 6.3884e-10 | 6.4393e-10 | 0.792 | 2.085 | 2.205 |
|---|
| 71 | 55.562 | 6.7896e-10 | 6.8489e-10 | 0.866 | 1.962 | 2.074 |
|---|
| 72 | 56.368 | 7.2630e-10 | 7.3330e-10 | 0.955 | 1.835 | 1.937 |
|---|
| 73 | 57.185 | 7.8299e-10 | 7.9138e-10 | 1.062 | 1.702 | 1.795 |
|---|
| 74 | 58.014 | 8.5204e-10 | 8.6231e-10 | 1.193 | 1.565 | 1.648 |
|---|
| 75 | 58.855 | 9.3798e-10 | 9.5087e-10 | 1.357 | 1.422 | 1.495 |
|---|
| 76 | 59.708 | 1.0478e-09 | 1.0645e-09 | 1.570 | 1.273 | 1.336 |
|---|
| 77 | 60.573 | 1.1930e-09 | 1.2154e-09 | 1.852 | 1.118 | 1.170 |
|---|
| 78 | 61.451 | 1.3938e-09 | 1.4257e-09 | 2.245 | 0.957 | 0.998 |
|---|
| 79 | 62.342 | 1.6894e-09 | 1.7383e-09 | 2.827 | 0.790 | 0.819 |
|---|
| 80 | 63.246 | 2.1669e-09 | 2.2510e-09 | 3.772 | 0.616 | 0.632 |
|---|
| 81 | 64.162 | 3.0642e-09 | 3.2409e-09 | 5.556 | 0.436 | 0.439 |
|---|
| 82 | 65.092 | 5.3163e-09 | 5.8709e-09 | 10.055 | 0.251 | 0.243 |
|---|
| 83 | 66.036 | 1.4745e-08 | 1.6122e-08 | 29.128 | 0.091 | 0.088 |
|---|
| 84 | 66.993 | 7.1102e-09 | 6.2699e-09 | 14.689 | 0.188 | 0.227 |
|---|
| 85 | 67.964 | 3.3846e-09 | 3.1581e-09 | 7.321 | 0.395 | 0.452 |
|---|
| 86 | 68.949 | 2.1598e-09 | 2.0598e-09 | 4.897 | 0.619 | 0.693 |
|---|
| 87 | 69.949 | 1.5631e-09 | 1.5073e-09 | 3.718 | 0.856 | 0.947 |
|---|
| 88 | 70.963 | 1.2113e-09 | 1.1758e-09 | 3.023 | 1.105 | 1.214 |
|---|
| 89 | 71.991 | 9.7937e-10 | 9.5491e-10 | 2.566 | 1.367 | 1.496 |
|---|
| 90 | 73.035 | 8.1458e-10 | 7.9667e-10 | 2.250 | 1.645 | 1.793 |
|---|
| 91 | 74.093 | 6.9004e-10 | 6.7925e-10 | 1.653 | 1.942 | 2.104 |
|---|
| 92 | 75.167 | 6.0805e-10 | 5.9315e-10 | 2.763 | 2.205 | 2.411 |
|---|
| 93 | 76.257 | 5.2987e-10 | 5.1859e-10 | 2.182 | 2.531 | 2.758 |
|---|
| 94 | 77.362 | 4.6715e-10 | 4.5832e-10 | 1.928 | 2.873 | 3.123 |
|---|
| 95 | 78.484 | 4.1564e-10 | 4.0833e-10 | 1.792 | 3.230 | 3.507 |
|---|
| 96 | 79.621 | 3.7237e-10 | 3.6614e-10 | 1.704 | 3.607 | 3.913 |
|---|
| 97 | 80.776 | 3.3544e-10 | 3.3002e-10 | 1.643 | 4.006 | 4.343 |
|---|
| 98 | 81.946 | 3.0354e-10 | 2.9875e-10 | 1.603 | 4.429 | 4.800 |
|---|
| 99 | 83.134 | 2.7568e-10 | 2.7140e-10 | 1.577 | 4.879 | 5.286 |
|---|
| 100 | 84.339 | 2.5114e-10 | 2.4727e-10 | 1.564 | 5.359 | 5.805 |
|---|
| 101 | 85.562 | 2.2934e-10 | 2.2581e-10 | 1.563 | 5.871 | 6.361 |
|---|
| 102 | 86.802 | 2.0985e-10 | 2.0660e-10 | 1.573 | 6.420 | 6.956 |
|---|
| 103 | 88.060 | 1.9229e-10 | 1.8928e-10 | 1.593 | 7.010 | 7.598 |
|---|
| 104 | 89.337 | 1.7638e-10 | 1.7356e-10 | 1.625 | 7.647 | 8.290 |
|---|
| 105 | 90.632 | 1.6188e-10 | 1.5921e-10 | 1.653 | 8.337 | 8.931 |
|---|
| 106 | 91.945 | 1.4854e-10 | 1.4618e-10 | 1.469 | 9.091 | 8.937 |
|---|
| 107 | 93.278 | 1.3683e-10 | 1.3428e-10 | 1.593 | 9.164 | 8.943 |
|---|
| 108 | 94.630 | 1.2552e-10 | 1.2307e-10 | 1.522 | 9.170 | 8.949 |
|---|
| 109 | 96.002 | 1.1500e-10 | 1.1267e-10 | 1.448 | 9.176 | 8.955 |
|---|
| 110 | 97.394 | 1.0523e-10 | 1.0297e-10 | 1.404 | 9.182 | 8.962 |
|---|
| 111 | 98.805 | 9.6085e-11 | 9.3867e-11 | 1.377 | 9.189 | 8.969 |
|---|
| 112 | 100.237 | 8.7480e-11 | 8.5285e-11 | 1.363 | 9.196 | 8.976 |
|---|
| 113 | 101.690 | 7.9339e-11 | 7.7148e-11 | 1.361 | 9.203 | 8.983 |
|---|
| 114 | 103.164 | 7.1594e-11 | 6.9386e-11 | 1.372 | 9.210 | 8.991 |
|---|
| 115 | 104.660 | 6.4179e-11 | 6.1933e-11 | 1.396 | 9.217 | 8.998 |
|---|
| 116 | 106.177 | 5.7031e-11 | 5.4722e-11 | 1.436 | 9.225 | 9.006 |
|---|
| 117 | 107.716 | 5.0085e-11 | 4.7684e-11 | 1.495 | 9.233 | 9.015 |
|---|
| 118 | 109.277 | 4.3268e-11 | 4.0740e-11 | 1.577 | 9.241 | 9.023 |
|---|
| 119 | 110.861 | 3.6497e-11 | 3.3798e-11 | 1.688 | 9.249 | 9.032 |
|---|
| 120 | 112.468 | 2.9659e-11 | 2.6732e-11 | 1.841 | 9.258 | 9.041 |
|---|
| 121 | 114.099 | 2.2578e-11 | 1.9395e-11 | 2.050 | 9.267 | 9.051 |
|---|
| 122 | 115.752 | 1.5795e-11 | 1.3185e-11 | 1.830 | 9.276 | 9.060 |
|---|
| 123 | 117.430 | 1.1403e-11 | 6.3646e-12 | 3.489 | 9.286 | 9.070 |
|---|
| 124 | 119.132 | 4.7426e-12 | 7.3412e-12 | 4.002 | 9.296 | 9.081 |
|---|
| 125 | 120.859 | 1.0218e-11 | 1.7930e-11 | 5.011 | 9.306 | 9.091 |
|---|
| 126 | 122.611 | 2.1608e-11 | 3.2733e-11 | 6.934 | 9.317 | 9.102 |
|---|
| 127 | 124.388 | 3.7162e-11 | 5.4613e-11 | 10.825 | 9.328 | 9.114 |
|---|
| 128 | 126.191 | 6.0567e-11 | 9.3150e-11 | 20.346 | 9.339 | 9.126 |
|---|
| 129 | 128.021 | 1.0320e-10 | 1.8676e-10 | 46.724 | 9.351 | 7.888 |
|---|
| 130 | 129.876 | 2.1210e-10 | 4.4134e-10 | 83.708 | 6.509 | 3.343 |
|---|
| 131 | 131.759 | 4.3577e-10 | 2.0692e-10 | 165.281 | 3.172 | 7.140 |
|---|
| 132 | 133.669 | 1.8781e-10 | 1.0887e-10 | 51.111 | 7.371 | 9.177 |
|---|
| 133 | 135.606 | 1.0212e-10 | 6.8586e-11 | 20.935 | 9.401 | 9.191 |
|---|
| 134 | 137.572 | 6.4864e-11 | 4.5141e-11 | 12.234 | 9.415 | 9.205 |
|---|
| 135 | 139.566 | 4.2471e-11 | 2.8250e-11 | 8.923 | 9.429 | 9.220 |
|---|
| 136 | 141.589 | 2.5980e-11 | 1.4665e-11 | 7.823 | 9.444 | 9.236 |
|---|
| 137 | 143.642 | 1.2807e-11 | 1.1421e-11 | 6.761 | 9.459 | 9.252 |
|---|
| 138 | 145.724 | 1.4869e-11 | 2.3081e-11 | 7.749 | 9.475 | 9.268 |
|---|
| 139 | 147.836 | 2.7179e-11 | 5.4114e-11 | 17.247 | 9.491 | 9.286 |
|---|
| 140 | 149.979 | 6.5478e-11 | 1.3398e-10 | 43.931 | 9.508 | 9.303 |
|---|
| 141 | 152.153 | 1.7648e-10 | 2.1715e-10 | 87.832 | 7.959 | 6.921 |
|---|
| 142 | 154.358 | 1.5196e-10 | 1.0236e-10 | 37.747 | 9.261 | 9.341 |
|---|
| 143 | 156.596 | 7.7266e-11 | 6.0686e-11 | 10.721 | 9.562 | 9.361 |
|---|
| 144 | 158.866 | 4.8416e-11 | 4.0514e-11 | 4.945 | 9.582 | 9.381 |
|---|
| 145 | 161.168 | 3.2663e-11 | 2.7890e-11 | 2.961 | 9.602 | 9.402 |
|---|
| 146 | 163.505 | 2.2068e-11 | 1.8725e-11 | 2.081 | 9.623 | 9.425 |
|---|
| 147 | 165.875 | 1.4032e-11 | 1.1462e-11 | 1.635 | 9.645 | 9.447 |
|---|
| 148 | 168.279 | 7.5861e-12 | 5.6826e-12 | 1.395 | 9.667 | 9.471 |
|---|
| 149 | 170.718 | 3.7276e-12 | 4.1820e-12 | 1.272 | 9.690 | 9.496 |
|---|
| 150 | 173.193 | 6.8315e-12 | 7.6685e-12 | 0.578 | 9.714 | 9.522 |
|---|
| 151 | 175.703 | 1.1028e-11 | 1.2484e-11 | 1.588 | 9.739 | 9.548 |
|---|
| 152 | 178.250 | 1.5476e-11 | 1.7840e-11 | 1.492 | 9.765 | 9.576 |
|---|
| 153 | 180.834 | 2.1076e-11 | 2.3106e-11 | 1.494 | 9.793 | 9.605 |
|---|
| 154 | 183.455 | 2.6101e-11 | 2.9629e-11 | 2.227 | 9.821 | 9.635 |
|---|
| 155 | 186.114 | 3.3048e-11 | 3.7171e-11 | 2.559 | 9.850 | 9.666 |
|---|
| 156 | 188.812 | 4.1184e-11 | 4.6498e-11 | 3.304 | 9.880 | 9.698 |
|---|
| 157 | 191.549 | 5.1418e-11 | 5.9179e-11 | 4.884 | 9.912 | 9.732 |
|---|
| 158 | 194.326 | 6.5630e-11 | 7.9077e-11 | 8.771 | 9.945 | 9.767 |
|---|
| 159 | 197.142 | 8.8452e-11 | 1.1757e-10 | 22.663 | 9.979 | 9.804 |
|---|
| 160 | 200.000 | 1.3394e-10 | 1.2549e-10 | 62.512 | 10.014 | 9.842 |
|---|
The first attempt remains incomplete and has no whole-grid result. The complete revision does not repair the underlying broad-band accuracy limitations. The original M02 failed accuracy screens and M01 3D field context remain unchanged.
NEXT WEAKNESS / PLANNED, NOT EXECUTED
Spatial accuracy still needs work.
The response remains sensitive to the mesh across this frequency band even after modal reduction is removed. The next edition should freeze a bounded refinement and verification plan around the sensitivity demonstrated here, while testing retained-mode error separately. Full-band predictive accuracy, other-material performance and fracture claims remain withheld. This is proposed follow-up work: M03 adds no further study, changes no numerical source and retunes no acceptance gate.
05 / EXECUTABLE EVIDENCE
Open the source.
Check the comparison.
The packages bind the exact plans, source, scalar records, retained fields, attempt history and independent review. Downloading or reproducing them does not convert a failed accuracy screen into physical validation.
Core contents include all 322 current reports and six current field checkpoints, the original 233 reports and four fields, fixed-input snapshots, source, tests and original plot source/SVG/CSV. The reviewer package supplies executable checks and two midpoint reference solutions. The exact extracted author core passed 21 author tests, five reviewer analytical tests and the 999-check audit; the transformed historical record also passed its public replay. That replay does not rehash the unavailable original private-path summary. Full audit receipts and reproduction instructions are inside the reviewer ZIP, with their hashes in the compact index. Both packages document their scope and any redaction. No hardware control endpoint is provided.
Current summary SHA-256:
451ba5f2a5d31163960ff7475a1a5412ec6c1f27ccd6a30ada36b597cec924d8