{
  "schema": "e02-e01-geometry-baseline-v1",
  "created_utc": "2026-10-06T20:22:50.842419+00:00",
  "inputs": [
    {
      "path": "custom-poc/e01-assemblies/impact_cartridge.py",
      "sha256": "5b4057fa826a8b178d3cf11263902d26eee6763236088bcb1f55cb3659ce06ce"
    },
    {
      "path": "custom-poc/e01-assemblies/generated-v2/E01-I/GEOMETRY-CHECKS.json",
      "sha256": "50efb4466e6d6981f000e54affa28777a93d2fdb216fe30eb2484a5d98af39dc"
    }
  ],
  "parameters_from_frozen_source": {
    "release_tip_z_mm": 85.0,
    "upper_stop_tip_z_mm": 90.0,
    "target_tip_z_mm": 0.0,
    "bumper_engagement_tip_z_mm": -2.0,
    "hard_capture_tip_z_mm": -5.0,
    "nominal_moving_mass_kg": 0.012,
    "maximum_moving_mass_kg": 0.02,
    "guide_diameter_mm": 4.0,
    "guide_pitch_mm": 24.0,
    "guide_length_mm": 120.0,
    "guide_bushing_id_mm": 4.1,
    "bushing_body_od_mm": 6.0,
    "bushing_flange_od_mm": 8.0,
    "body_bushing_bore_mm": 6.2,
    "release_pin_diameter_mm": 3.0,
    "bumper_material": "3mm compliant pad, stiffness/loss unmeasured; compression model hypothetical"
  },
  "nominal_weight_n": 0.1176798,
  "ideal_gravity_work_to_target_j": 0.010002783000000001,
  "ideal_free_fall_time_to_target_s": 0.13166311412322276,
  "minimum_pin_withdrawal_mm": 34,
  "nominal_release_to_target_mm": 85,
  "nominal_release_to_buffer_engagement_mm": 87,
  "nominal_release_to_hard_boundary_mm": 90,
  "maximum_release_to_hard_boundary_mm": 95,
  "cad_illustrative_moving_mass_g": 12.204672128525718,
  "limits": [
    "Mass is a model assumption; CAD mass uses illustrative densities and is not a weigh-in.",
    "87\u201390mm describes nominal release to buffer/hard-boundary positions; actual reset starts at a measured captured position.",
    "Ideal fall time excludes friction, target motion and contact and is not a cycle-rate claim.",
    "Current CAD has no automatic lifting, powered latch, engagement sensor, motor mount or qualified capture mechanism."
  ]
}
