{
  "schema_version": 1,
  "retrieved_date": "2026-10-06",
  "purpose": "Source-grounded component models and mounting datums; no physical validation, fracture prediction, purchase, or cost certification.",
  "lead_input_file": "ND64-4-VERIFIED-INPUT.json",
  "lead_input_sha256": "b81f1818a692e0d73eacdaf08159928efca621815eb8bb6203565db5051b3ebf",
  "components": [
    {
      "schema_version": 1,
      "record_status": "Verified transcription of manufacturer nominal data; no physical specimen measurement",
      "retrieved_date": "2026-10-06",
      "manufacturer": "Dayton Audio",
      "model": "ND64-4",
      "source_urls": {
        "product": "https://www.daytonaudio.com/product/1452/nd64-4-2-1-2-aluminum-magnesium-cone-full-range-driver-4-ohm",
        "drawing_and_parameters_pdf": "https://www.daytonaudio.com/images/resources/295-520--dayton-audio-nd64-4-aluminum-magnesium-cone-full-range-driver-specifications.pdf",
        "manufacturer_buy_link": "https://www.parts-express.com/Dayton-Audio-ND64-4-2-1-2-Aluminum-Magnesium-Cone-Full-Range-Driver-4-Ohm-295-520?quantity=1"
      },
      "availability": {
        "official_product_page_present": true,
        "retailer_stock_verified": false,
        "price_verified": false,
        "discontinued_verified": false
      },
      "nominal_parameters_si": {
        "Re_ohm": 3.7,
        "Le_h": 0.00037,
        "Le_test_frequency_hz": null,
        "Fs_hz": 103.0,
        "Qms": 4.36,
        "Qes": 0.36,
        "Qts": 0.33,
        "Mms_kg": 0.00256,
        "Mms_includes_air_load": true,
        "Cms_m_per_n": 0.00093,
        "Sd_m2": 0.00156,
        "Bl_n_per_a": 4.13,
        "Vas_m3": 0.00042,
        "Xmax_one_way_m": 0.0019,
        "catalog_rms_power_w": 15.0
      },
      "derived_nominal_parameters": {
        "Rms_n_s_per_m": 0.3799886013296131,
        "Rms_formula": "2*pi*Fs*Mms/Qms",
        "Fs_from_Mms_Cms_hz": 103.1474924774158,
        "Qes_from_Fs_Mms_Re_Bl": 0.3593839511663503,
        "equivalent_piston_radius_m": 0.022283703068536734,
        "Vd_from_Sd_Xmax_m3": 2.964e-06
      },
      "mechanical_drawing_mm": {
        "coordinate_convention": "Origin at driver axis on rear mounting face; front-view X right, Y up. All four hole centers derived from labeled 66 mm PCD and symmetric 45-degree pattern.",
        "flange_width": 64.0,
        "flange_height": 64.0,
        "flange_diagonal_envelope": 77.0,
        "flange_corner_radius_callout": 4.0,
        "flange_exact_outline_defined": false,
        "mount_hole_diameter": 4.2,
        "mount_hole_count": 4,
        "mount_pitch_circle_diameter": 66.0,
        "mount_hole_centers_xy": [
          [
            23.33452377915607,
            23.33452377915607
          ],
          [
            -23.33452377915607,
            23.33452377915607
          ],
          [
            -23.33452377915607,
            -23.33452377915607
          ],
          [
            23.33452377915607,
            -23.33452377915607
          ]
        ],
        "manufacturer_baffle_cutout_diameter": 53.0,
        "rear_basket_diameter": 52.5,
        "total_depth": 38.8,
        "rear_projection_from_mounting_face": 34.5,
        "front_projection_derived": 4.3,
        "motor_diameter": 34.5,
        "lower_motor_segment_length": 15.5,
        "terminal_tab_width": null,
        "terminal_tab_thickness": null,
        "terminal_and_connector_envelope": null,
        "mounting_torque": null,
        "drawing_tolerances": null
      },
      "source_discrepancies": [
        "Published Vd=29.64 cm^3 conflicts with Sd=15.6 cm^2 and Xmax=1.9 mm; their product is 2.964 cm^3. Do not use the listed Vd as an independent model input.",
        "Product page rounds total depth to 39 mm; drawing labels 38.8 mm.",
        "Marketing peak-to-peak excursion above 6 mm is not the 1.9 mm one-way linear Xmax limit."
      ],
      "model_boundaries": [
        "Catalog nominal parameters are not a measured calibration or guaranteed tolerance interval.",
        "Do not add a full air-load mass to Mms without subtracting or otherwise reconciling its included air load.",
        "Declare rear enclosure volume, leakage, wall compliance, and front radiation approximation. An open rear baffle is not equivalent to a sealed enclosure.",
        "Thermal RMS power rating is not an excursion-safe voltage at every frequency.",
        "Linear lumped parameters cannot validate breakup modes, large-excursion response, acoustic focus, or rock fracture.",
        "No solder-free connector fit is verified; tab and purchased-terminal dimensions must be confirmed.",
        "No manufacturer drawing, image or CAD file is included in this authored public factual record."
      ]
    },
    {
      "manufacturer": "Dayton Audio",
      "model": "ND91-4",
      "selection_status": "Larger nominal model reference; resolve physical revision before fabrication",
      "source_urls": {
        "product": "https://www.daytonaudio.com/product/1046/nd91-4-3-1-2-aluminum-cone-full-range-driver-4-ohm",
        "drawing_pdf_2026_02_26": "https://www.daytonaudio.com/images/resources/290-224--dayton-audio-nd91-4-specification-sheet.pdf",
        "older_drawing_pdf": "https://www.daytonaudio.com/images/resources/290-224--dayton-audio-nd91-4-3.5-inch-aluminum-cone-full-range-driver-4-ohm-specifications.pdf",
        "manufacturer_klippel_report_for_separate_later_review": "https://www.daytonaudio.com/images/resources/290-224-dayton-audio-nd91-4-klippel-test-results-revised.pdf"
      },
      "nominal_parameters_si": {
        "Re_ohm": 4.3,
        "Le_h": 0.00083,
        "Le_test_frequency_hz": 1000,
        "Fs_hz": 74,
        "Qms": 4.24,
        "Qes": 0.45,
        "Qts": 0.41,
        "Mms_kg": 0.0048,
        "Mms_includes_air_load": true,
        "Cms_m_per_n": 0.00096,
        "Sd_m2": 0.00304,
        "Bl_n_per_a": 4.59,
        "Vas_m3": 0.0014,
        "Xmax_one_way_m": 0.0046,
        "catalog_rms_power_w": 30
      },
      "drawing_mm_2026": {
        "outside_across_opposite_mounting_lugs": 103.2,
        "four_hole_diameter": 4.0,
        "labeled_circle_diameter": 93.3,
        "provisional_mount_hole_centers_xy": [
          [
            46.65,
            0
          ],
          [
            0,
            46.65
          ],
          [
            -46.65,
            0
          ],
          [
            0,
            -46.65
          ]
        ],
        "hole_pattern_basis": "Interpretation of diameter callout on dashed circle through four cardinal-axis holes; confirm on purchased revision.",
        "rear_mount_face_to_back": 56.8,
        "front_flange_face_to_back": 57.9,
        "total_depth": 62.9,
        "rear_basket_max_width": 77.8,
        "motor_diameter": 42,
        "side_view_flange_width": 88.5,
        "front_dome_width": 73.7,
        "product_page_recommended_baffle_cutout": 85,
        "terminal_envelope": null,
        "tolerances": null
      },
      "source_discrepancies": [
        "2026 drawing dimensions differ from older drawing and current HTML: 103.2 versus103.5 overall;62.9 versus63.4 depth;4 versus4.2 hole diameter. Do not mix revisions.",
        "Published Vd12.2 cm^3 differs from Sd30.4 cm^2 times Xmax4.6 mm=13.984 cm^3. Use documented Sd and Xmax separately.",
        "Manufacturer Klippel report has distinct measured parameter sets; do not silently replace nominal catalog parameters or mix small/large/warm/cold sets."
      ],
      "derived_nominal_parameters": {
        "Rms_n_s_per_m": 0.5263649578090067,
        "Cms_m_per_n_used": 0.00096,
        "Cms_was_derived_from_Fs_Mms": false,
        "Fs_from_Mms_Cms_hz": 74.14193160595595,
        "Qes_from_Fs_Mms_Re_Bl": 0.455507896334924,
        "Qes_relative_difference_from_catalog": 0.012239769633164421,
        "equivalent_piston_radius_m": 0.03110726690017501,
        "Vd_from_Sd_Xmax_m3": 1.3984e-05
      },
      "availability": {
        "official_product_page_present": true,
        "retailer_stock_verified": false,
        "price_verified": false
      }
    },
    {
      "manufacturer": "Visaton",
      "model": "FRS 5 - 8 Ohm",
      "article_number": "2231",
      "selection_status": "Smaller geometry reference; unresolved parameter conflict excludes it from nominal performance comparison unless explicitly modeled as sensitivity cases",
      "source_urls": {
        "product": "https://visaton.de/en/products/drivers/fullrange-systems/frs-5-8-ohm",
        "drawing": "https://visaton.de/sites/default/files/dd_product/frs5_tz.gif",
        "older_pdf_2017_04_13": "https://www.visaton.de/sites/default/files/dd_product/frs5_8.pdf"
      },
      "nominal_parameters_si": {
        "Re_ohm": 7.2,
        "Le_h": 0.0002,
        "Le_test_frequency_hz": null,
        "Fs_hz": 270,
        "Qms": 3.19,
        "Qes": 1.81,
        "Qts": 1.15,
        "Mms_kg": 0.0005,
        "Mms_includes_air_load": null,
        "Cms_m_per_n": null,
        "Sd_m2": 0.0012,
        "Bl_n_per_a": 1.6,
        "Vas_m3": 0.00016,
        "Xmax_one_way_m": null,
        "catalog_excursion_limit_one_way_m": 0.002,
        "catalog_rated_power_w": 5
      },
      "drawing_mm": {
        "overall_height_with_lugs": 68,
        "outer_basket_diameter": 52.5,
        "mount_hole_diameter": 4.2,
        "mount_hole_centers_xy": [
          [
            0,
            30
          ],
          [
            0,
            -30
          ]
        ],
        "mount_center_distance": 60,
        "product_baffle_cutout": 46,
        "drawing_axial_depth": 31.5,
        "front_outer_diameter": 50.5,
        "rear_motor_diameter": 45,
        "depth_datum_note": "31.5 callout starts at front reference line as drawn; rear mounting datum offset is not separately specified.",
        "terminal_envelope": null,
        "tolerances": null
      },
      "source_discrepancies": [
        "Current HTML Fs270Hz versus2017PDF Fs290Hz. Current HTML selected only for algebraic consistency check.",
        "Fs,Mms,Re,Bl predict Qes2.38565 rather than published1.81, about31.8% difference. Do not portray this set as a self-consistent calibrated equivalent circuit.",
        "The +/-2mm excursion limit is not identified as linear Xmax. Connections are solder lugs; solder-free fit unverified."
      ],
      "derived_nominal_parameters": {
        "Rms_n_s_per_m": 0.2659028264793869,
        "Cms_m_per_n_used": 0.0006949326724440178,
        "Cms_was_derived_from_Fs_Mms": true,
        "Fs_from_Mms_Cms_hz": 270.0,
        "Qes_from_Fs_Mms_Re_Bl": 2.385646921319749,
        "Qes_relative_difference_from_catalog": 0.3180369731048336,
        "equivalent_piston_radius_m": 0.019544100476116797,
        "Vd_from_Sd_Xmax_m3": null
      },
      "availability": {
        "official_product_page_present": true,
        "retailer_stock_verified": false,
        "price_verified": false
      }
    }
  ],
  "formulas": {
    "mechanical_damping": "Rms=2*pi*Fs*Mms/Qms",
    "missing_compliance": "Cms=1/((2*pi*Fs)^2*Mms)",
    "electrical_quality_check": "Qes=2*pi*Fs*Mms*Re/Bl^2",
    "piston_radius": "a=sqrt(Sd/pi)"
  },
  "modeling_guidance": [
    "Use named-driver nominal parameters separately; geometric resizing is not a motor or suspension scaling law.",
    "A first linear test can declare 0.1,0.25,0.5,1 Vrms and20-2000Hz as research assumptions, with excursion and current outputs. These are not a manufacturer-approved operating envelope.",
    "Specify net sealed air volume after driver and hardware displacement. Enclosure compliance, leaks, and walls change the response.",
    "A baffled rigid-piston approximation is not an acoustic laser or exact finite-box radiation solution. State ka and distance assumptions.",
    "Mms includes an air load for Dayton drivers. Do not append another full radiation mass without reconciling it.",
    "Do not claim a thermal rated power permits unlimited low-frequency excursion; compare peak displacement with the stated linear limit.",
    "Purchased terminal dimensions, gasket thickness, screws, baffle tolerance, cooling and connector clearance remain build checks.",
    "Calibrate the physical assembled driver with low-amplitude impedance/displacement/acoustic measurements before linking the model to specimen response."
  ],
  "public_material_policy": "Only authored factual records and source links; downloaded manufacturer drawings, photos and CAD remain outside the public package."
}
