E01 COMPONENT-BASED DIGITAL ASSEMBLIES This package contains original nominal mechanical CAD around a sourced Dayton ND64-4 driver and an original manually reset captive gravity cartridge. These are unbuilt digital engineering demonstrators, not qualified machines. No rock, crystal, diamond, log, steel pole or boulder was fractured or physically tested. The acoustic head has a purchased driver, actual mating holes and fastener stacks, enclosure/driver gaskets, grille, cable clamp and bench foot. Its external amplifier and actual terminals/connectors must be selected separately. No-solder compatibility and complete cost under$1000 remain unverified requirements. The impact cartridge has42 nominal solids, including two metal guides, positively retained tip and bushings, release pin, manual lift tab, removable cover, compliant pad templates and independent hard retainers. It produces no autonomous BPM. The provided mass/height arithmetic caps ideal gravitational work only; it does not qualify capture, guide friction, fastener strength or printed-part durability. REPRODUCE IN A NEW DIRECTORY Use Python with CadQuery2.8.0/OCP7.9.3.1.1, NumPy2.5.3 andMatplotlib3.11.2. python -m unittest discover -s . -p test_e01_geometry.py -v python generate_e01.py --output ./new-e01-reproduction The generator refuses to overwrite an existing output directory. It exports STEP and reimports every part, produces STL mesh audits, draws actual solids and writes BOM/instructions/viewer geometry. Kernel/STEP file bytes can depend on software/platform metadata; validate geometry/volumes rather than promising identical STEP bytes on another system. OUTPUTS generated-v2/E01-A and E01-I each have: ASSEMBLY.json — datums, part placements and STEP/STL checks -assembly.step — named colored assembly, original author geometry step/*.step — individual components in part coordinates; use stored placement stl-custom/*.stl — custom polymer candidates, gasket templates and machined reference geometry; manufacturing_kind is authoritative viewer.json — global-mm triangles/parts/explosion, same kernel solids BOM.json — per-part materials/status, current complete quote unavailable ASSEMBLY-INSTRUCTIONS.txt — reference sequence, fasteners and unresolved gates GEOMETRY-CHECKS.json — checks and illustrative moving-mass assumptions figures/ — beauty, assembled, exploded, actual cut section, datum view PNGs; front/side/top orthographic SVG linework fit-coupon and driver-gauge provide small process checks before full fabrication. The viewer kind printed means a candidate custom body, not a qualified print. Machined components and gasket templates have kind reference plus explicit manufacturing_kind. Purchased nominal references have no printable STL. SOURCE AND QUALITY BOUNDARIES Driver nominal data comes from the official source linked in the authored ND64-4-VERIFIED-INPUT.json. The driver reference is a conservative original envelope, not manufacturer CAD. Actual terminals, flange thickness and displaced air are unknown. Gasket compression and material/process tolerances are not qualified. E01-A-VOLUME-v2.json is the latest matching reference-air datum: 0.7039780004475063L. Earlier volume-v1 is superseded, not included as a current model input. All earlier failed artifacts remain private research history. STL preparation rounds vertices to0.00001mm, within the0.02mm tessellation tolerance, and removes only collapsed pole triangles. It fills no holes and checks every retained edge for two oppositely oriented faces, zero degenerate faces and positive volume. The raw tip export failed this check before cleanup; that correction is documented. This mesh test is not physical qualification. Acceptance still needs dimensional coupons, actual supplier fasteners/connectors, measured sliding breakaway and moving mass, pad characterization, load-bearing checks, specimen fixture, low-power electrical/acoustic measurements and physical assembly review. No universal fracture scale, patentability, exclusive ownership or automatic open-source license is established by this package. AUTHORED CONTRIBUTIONS Ashley Kalkowski supplied research direction and goals. Computational assistance created the CAD/code/documentation within this project using established mechanics and manufacturer nominal data. No outside laboratory performed these CAD checks.