{
  "status": "AUTHORED_DIGITAL_QA_HISTORY_NOT_PHYSICAL_TESTS",
  "date": "2026-10-06",
  "corrections": [
    {"id": "foot-axis", "finding": "Initial rotated rib used50mm along the wrong axis and did not surround the specified foot bolt axes.", "repair": "Rib dimensions changed to16x50x8 before X90 rotation; material-annulus and empty-bore checks pass at allfour attachment axes."},
    {"id": "communicating-air-domain", "finding": "Original rectangular cavity omitted1mm box-gasket layer and narrow baffle-throat annulus.", "repair": "Domain includes both communicating regions, subtracting all modeled intrusions sequentially with volume ledger."},
    {"id": "boss-tangency", "finding": "Valid kernel enclosure and gasket each contained5 disconnected solids. Four radius6mm bosses were tangent to cavity walls.", "rejected_source_sha256": "190900f441712ca8e9d50639baeedaaa10d319f2862491e1deb410360d030547", "repair": "Increase nominal boss radius to7mm, creating1mm wall overlap; all67 acoustic parts are single valid solids. Net modeled volume changed from0.706091410953079L to0.7039780004475063L.", "revised_source_sha256": "ecace9154800e4fb1949027be79970fd7cebbf3e91ffce0c5004429eb7a59f33"},
    {"id": "impact-interferences", "finding": "Initial frontcover overlapped base and capture pads overlapped rods.", "repair": "Cover begins atZ7; pads have actual4.4mm rod-relief notches. Nominal positive-volume pair collisions are zero."},
    {"id": "collapsed-pole-facet", "finding": "Raw kernel STL for spherical-ended machined tip had7641 triangles,1 collapsed facet and2 bad oriented welded edges; release generation stopped.", "repair": "Weld vertices at0.00001mm and remove only collapsed facets. Tip7640 triangles haszero bad edges,zero degenerate faces and positive343.37607652088354mm3 mesh volume. No holes are filled."},
    {"id": "render-depth", "finding": "Initial painter-sorted illustration showed interior triangles over outer surfaces.", "repair": "Use explicit per-pixel depth rasterization of the actual kernel tessellation. Drawings are geometry illustrations, not photographs."}
  ],
  "remaining_scope": "No printed/machined assembly, measured component fit, friction, strength, capture, sound pressure, electrical behavior or fracture test is established. Nominal geometric checks are narrower than physical validation."
}
