{
  "edition": "EL01",
  "status": "documented candidate interfaces; no powered connection or physical validation",
  "review_date_utc": "2026-10-06",
  "purpose": "Make the electrical measurement boundary explicit alongside the acoustic build.",
  "components": [
    {"id":"M01","manufacturer":"Digilent","part_number":"410-415","name":"Analog Discovery 3","quantity":1,"purpose":"PC-connected differential terminal-voltage acquisition candidate","displayed_price_usd":379.0,"price_basis":"Manufacturer shop display observed 2026-10-06; not a delivered quote","included":"USB-C to USB-C cable, 2x15 flywire cable, flywire labels and header pack","source":"https://digilent.com/shop/analog-discovery-3/","fit_status":"MTE differential interface documented; test-point fixture and installed grounding unverified"},
    {"id":"M02","manufacturer":"Digilent","part_number":"240-137","name":"Mini Grabber Test Clips with Leads, five-pack","quantity":1,"purpose":"Temporary low-energy measurement connections to qualified test points","displayed_price_usd":11.0,"price_basis":"Manufacturer shop display observed 2026-10-06; not a delivered quote","included":"Five clips with leads compatible with female MTE flywires","source":"https://digilent.com/shop/mini-grabber-test-clips-with-leads/","fit_status":"Maximum documented grip diameter 1.27 mm; clip access and secure contact still require a test-point fixture. These are not speaker power connectors."},
    {"id":"M03","manufacturer":"Dayton Audio","part_number":"UMM-6","name":"USB measurement microphone","quantity":1,"purpose":"Airborne acoustic response only; not force, strain or crystal vibration","displayed_price_usd":null,"price_basis":"Price not verified in this measurement supplement","included":"USB connection cable, mini tripod, carrying case","source":"https://www.daytonaudio.com/product/1116/umm-6-usb-measurement-microphone","fit_status":"USB-B device port and supplied cable documented; host port compatibility must be checked"}
  ],
  "electrical_measurement": {
    "instrument_input_mode":"Differential MTE inputs, not the single-ended BNC adapter",
    "conceptual_net_map":[
      {"from":"AD3 scope 1+","to":"selected amplifier channel speaker + at the driver","purpose":"Positive differential sense"},
      {"from":"AD3 scope 1-","to":"same amplifier channel speaker - at the driver","purpose":"Negative differential sense; this is not a ground lead"},
      {"from":"instrument reference ground","to":"documented amplifier DC ground reference only","purpose":"Common-mode reference to be reviewed with the actual USB/audio/power grounding; never connect this to a speaker output"}
    ],
    "no_grounded_output_return":true,
    "speaker_outputs_must_not_be_joined":true,
    "input_rating":"AD3 high input range is ±25 V per input relative to instrument ground; low range has different common-mode constraints. Document all steady-state and transient levels before attachment.",
    "isolation":"Differential does not mean galvanically isolated. USB, audio and supply ground paths need an actual continuity review.",
    "class_d_measurement":"Retain a raw acquisition fast enough to resolve switching content and document anti-alias filtering. Estimate the 20–1000 Hz fundamental separately; raw PWM RMS is not the sinusoidal terminal Vrms used by E01.",
    "uncertainty":"The May2025 datasheet gives typical high-range accuracy ±100 mV plus0.5% at zero common-mode. Resolution, filtering and averaging do not erase gain, offset or common-mode uncertainty. Subvolt comparisons require calibration evidence; nominal digital readings are not automatically adequate.",
    "power_limit":"Terminal voltage alone does not measure real terminal power. A synchronized current channel with qualified shunt/sensor, bandwidth, phase and loading is still required for an electrical energy claim.",
    "sources":["https://files.digilent.com/datasheets/Analog-Discovery-3-Datasheet.pdf","https://files.digilent.com/manuals/WaveForms/3.24.3/start10.html"]
  },
  "microphone_measurement": {
    "chain":"Specimen-side air field -> UMM-6 -> supplied USB cable -> PC recording application",
    "power":"USB power; no separate microphone preamplifier or phantom-power unit in this chain",
    "calibration":"Load the actual unit serial-number calibration file; record microphone position, orientation, recording gain and sample rate. Relative response is distinct from calibrated absolute SPL.",
    "scope":"Published calibrated frequency response is18Hz–20kHz. This does not cover arbitrary ultrasonic specimen modes.",
    "source_conflict":"Product page and older quick guide state different maximum-SPL figures; no maximum usable SPL is adopted here.",
    "synchronization":"Separate USB audio output and USB microphone clocks do not establish sample-synchronous phase or mechanical timing.",
    "sources":["https://www.daytonaudio.com/product/1116/umm-6-usb-measurement-microphone","https://www.daytonaudio.com/images/resources/390-808-dayton-audio-umm-6-quick-reference-guide-2.pdf"]
  },
  "remaining_interfaces":["Protected differential test points and mechanical strain relief","Qualified synchronized current measurement","Motion/force sensor and attachment for contact specimens","Host USB-A/USB-C adapter or cable where required","Measured amplifier gain, clipping, idle current and switching spectrum"],
  "software":"Manufacturer WaveForms is a candidate acquisition application. This research release contains numerical software and documentation only; no instrument SDK, hardware-control endpoint or automated energization is included.",
  "physical_tests":0
}
