{
  "schema_version": 1,
  "edition": "EL01-core-wiring-1",
  "review_date_utc": "2026-10-06",
  "project": "DESTROYING BOULDERS / E01-A low-power acoustic bench",
  "status": "Candidate connection register; not a purchase-ready or hardware-validated build",
  "physical_tests": 0,
  "hardware_executed": false,
  "purchases": 0,
  "scope": "One ND64 driver on one amplifier channel; wired PC analog audio; enclosed external supply; separate measurement companion. Manual E01 impact has no drive electronics.",
  "items": [
    {
      "id": "E01",
      "part_number": "ICUSBAUDIO2D",
      "name": "StarTech USB wired audio output adapter",
      "quantity": 1,
      "category": "required_candidate",
      "source_ids": [
        "S04",
        "S05"
      ],
      "price_usd": null,
      "price_basis": "Official price not verified",
      "manufacturer": "StarTech",
      "interfaces": {
        "host": "attached USB-A cable; USB2",
        "output": "3.5 mm analog line-out/SPDIF combo jack, analog TRS use"
      },
      "installation": {
        "eq": "Direct",
        "unused": "headphone output, microphone input, optical SPDIF"
      },
      "unknowns": [
        "Actual PC port and OS enumeration",
        "Output gain, distortion, latency, frequency response"
      ]
    },
    {
      "id": "E02",
      "part_number": "MU3MMS",
      "name": "StarTech 3 ft stereo audio cable",
      "quantity": 1,
      "category": "required_candidate",
      "source_ids": [
        "S06",
        "S07"
      ],
      "price_usd": 7.16,
      "price_basis": "Official USD display observed 2026-10-06; not delivered quote",
      "manufacturer": "StarTech",
      "interfaces": {
        "both_ends": "3.5 mm male TRS, three contacts",
        "nominal_length_m": 0.9144
      }
    },
    {
      "id": "E03",
      "part_number": "KAB-215v2",
      "name": "Dayton amplifier board",
      "quantity": 1,
      "category": "required_candidate",
      "source_ids": [
        "S01",
        "S02"
      ],
      "price_usd": 33.99,
      "price_basis": "Manufacturer MSRP observed 2026-10-06",
      "manufacturer": "Dayton Audio",
      "interfaces": {
        "dc_range_v": [
          12,
          24
        ],
        "listed_dc_current_a": 2,
        "nominal_load_ohm": [
          4,
          8
        ]
      },
      "included": [
        "20-inch two-conductor DC harness",
        "20-inch four-conductor speaker harness"
      ],
      "unknowns": [
        "Gain/clipping at 15 V with 4 ohm driver",
        "Exact board mounting hole coordinates and connector clearances",
        "Harness wire gauge and separately rated overcurrent protection"
      ]
    },
    {
      "id": "E04",
      "part_number": "KAB-PMV3",
      "name": "Dayton matched control/power panel kit",
      "quantity": 1,
      "category": "required_candidate",
      "source_ids": [
        "S03",
        "S01"
      ],
      "price_usd": 31.99,
      "price_basis": "Manufacturer MSRP observed 2026-10-06",
      "manufacturer": "Dayton Audio",
      "interfaces": {
        "panel_mm": [
          120,
          95,
          2.3
        ],
        "panel_mount_spacing_mm": [
          111,
          86
        ],
        "aux": "3-contact TRS 3.5 mm jack + 500 mm matched harness",
        "dc": "2.1x5.5 mm coax jack + 500 mm matched harness",
        "volume": "1 kohm control, knob and 500 mm matched harness",
        "switch": "SPST rocker and 500 mm matched harness"
      },
      "included": [
        "4 M3x60 standoffs",
        "8 M3x6 standoff screws",
        "8 M3x16 wood screws",
        "Gasket tape",
        "3 status LEDs and momentary pairing button with leads"
      ],
      "unknowns": [
        "Jack seating depth/current rating and actual center-to-DC+ continuity",
        "Header conductor counts/pinouts beyond documented interfaces",
        "Actual revision fit and custom enclosure mounting"
      ]
    },
    {
      "id": "E05",
      "part_number": "GST40A15-P1J",
      "name": "Mean Well enclosed DC supply",
      "quantity": 1,
      "category": "required_candidate",
      "source_ids": [
        "S08"
      ],
      "price_usd": null,
      "price_basis": null,
      "manufacturer": "Mean Well",
      "interfaces": {
        "output_v": 15,
        "rated_current_a": 2.67,
        "rated_power_w": 40,
        "output_tolerance_percent": 3,
        "plug_inner_mm": 2.1,
        "plug_outer_mm": 5.5,
        "plug_length_mm": 11,
        "polarity": "center positive",
        "ac_inlet": "IEC320-C14",
        "input_vac": [
          90,
          264
        ],
        "case_mm": [
          125,
          50,
          31.5
        ]
      },
      "unknowns": [
        "Delivered price",
        "Actual jack retention/seating",
        "Final system grounding and low-voltage harness protection"
      ],
      "selection_reason": "Nominal DC range and barrel diameter match; physical validation remains. Rated current is available capacity, not current forced through the load."
    },
    {
      "id": "E06",
      "part_number": "PXT101",
      "name": "StarTech grounded North American mains cord",
      "quantity": 1,
      "category": "required_candidate",
      "source_ids": [
        "S09"
      ],
      "price_usd": null,
      "price_basis": null,
      "manufacturer": "StarTech",
      "interfaces": {
        "source": "NEMA5-15P",
        "supply_end": "IEC C13",
        "rated_vac": 125,
        "rated_a": 10,
        "conductors": 3,
        "awg": 18,
        "length_m": 1.8
      },
      "unknowns": [
        "Delivered price"
      ],
      "scope": "Factory cord into enclosed C14 supply; no mains fabrication."
    },
    {
      "id": "E07",
      "part_number": "ND64-4",
      "name": "Dayton E01-A driver",
      "quantity": 1,
      "category": "required_existing_design_component",
      "source_ids": [
        "S10",
        "S11"
      ],
      "price_usd": 24.99,
      "price_basis": "Manufacturer MSRP observed 2026-10-06",
      "manufacturer": "Dayton Audio",
      "interfaces": {
        "nominal_impedance_ohm": 4,
        "terminal_tab_width_mm": null,
        "terminal_tab_thickness_mm": null
      },
      "unknowns": [
        "Both terminal dimensions/polarity markings, actual connector access and retention"
      ]
    },
    {
      "id": "E08",
      "part_number": null,
      "name": "Speaker-end insulated terminations matched to actual ND64 tabs",
      "quantity": 2,
      "category": "mandatory_unresolved",
      "source_ids": [
        "S10",
        "S11"
      ],
      "price_usd": null,
      "price_basis": null,
      "manufacturer": null,
      "interfaces": {
        "from": "supplied amplifier speaker harness selected left pair",
        "to": "ND64 + and - tabs"
      },
      "unknowns": [
        "Exact mating connector part numbers",
        "Wire gauge and crimp tool",
        "Retention under vibration and clearance"
      ],
      "blocking": true
    },
    {
      "id": "E09",
      "part_number": null,
      "name": "Cable strain relief, insulated test-point fixture and electronics enclosure",
      "quantity": 1,
      "category": "mandatory_unresolved",
      "source_ids": [],
      "price_usd": null,
      "price_basis": null,
      "manufacturer": null,
      "unknowns": [
        "Exact mechanics, fasteners and insulating barriers",
        "Harness retention, bend radius, ventilation",
        "DC harness protection rating and integration"
      ],
      "blocking": true
    },
    {
      "id": "E10",
      "part_number": null,
      "name": "Host USB adapter or cable if the specified ports are unavailable",
      "quantity": 1,
      "category": "conditional_unresolved",
      "source_ids": [],
      "price_usd": null,
      "price_basis": null,
      "manufacturer": null,
      "unknowns": [
        "Actual PC USB-A data port for DAC",
        "USB-C data port for AD3 supplied C-to-C cable; separate adapter may be needed"
      ],
      "blocking": "conditional"
    },
    {
      "id": "M01",
      "part_number": "410-415",
      "name": "Digilent Analog Discovery 3",
      "quantity": 1,
      "category": "measurement_companion",
      "source_ids": [
        "S13",
        "S14"
      ],
      "price_usd": null,
      "price_basis": "Price owned and counted once by MEASUREMENT-INTERFACES.json",
      "manufacturer": "Digilent",
      "companion_id": "M01"
    },
    {
      "id": "M02",
      "part_number": "240-137",
      "name": "Digilent Mini Grabber Test Clips with Leads, five-pack",
      "quantity": 1,
      "category": "measurement_companion",
      "source_ids": [],
      "price_usd": null,
      "price_basis": "Price owned and counted once by MEASUREMENT-INTERFACES.json",
      "manufacturer": "Digilent",
      "companion_id": "M02"
    },
    {
      "id": "M03",
      "part_number": "UMM-6",
      "name": "Dayton USB measurement microphone",
      "quantity": 1,
      "category": "measurement_companion",
      "source_ids": [
        "S15"
      ],
      "price_usd": null,
      "price_basis": "Price unverified; measurement companion",
      "manufacturer": "Dayton Audio",
      "companion_id": "M03"
    }
  ],
  "interfaces": [
    {
      "id": "N01",
      "from": "PC USB-A data port",
      "to": "ICUSBAUDIO2D attached USB-A plug",
      "cable": "integral",
      "status": "catalog interface match; host availability unverified"
    },
    {
      "id": "N02",
      "from": "ICUSBAUDIO2D analog line-out/SPDIF combo jack",
      "to": "KAB-PMV3 AUX jack",
      "cable": "MU3MMS",
      "contacts": "TRS; use analog output, not optical",
      "status": "catalog interface match"
    },
    {
      "id": "N03",
      "from": "KAB-PMV3 matched AUX harness",
      "to": "KAB-215v2 guide callout 3",
      "action": "Remove existing AUX jumper per manufacturer guide before insertion",
      "board_header_wire_count": null,
      "status": "manufacturer accessory match; no repinning"
    },
    {
      "id": "N04",
      "from": "KAB-PMV3 volume harness",
      "to": "KAB-215v2 guide callout 4",
      "board_header_wire_count": null,
      "status": "manufacturer accessory match; keyed supplied harness"
    },
    {
      "id": "N05",
      "from": "KAB-PMV3 SPST rocker harness",
      "to": "KAB-215v2 guide callout 6",
      "board_header_wire_count": null,
      "status": "manufacturer accessory match; control switch, not mains isolation or emergency stop"
    },
    {
      "id": "N06",
      "from": "Grounded North American outlet",
      "to": "GST40A15-P1J C14 inlet",
      "cable": "PXT101",
      "status": "catalog interface match"
    },
    {
      "id": "N07",
      "from": "GST40A15-P1J factory center-positive plug",
      "to": "KAB-PMV3 2.1x5.5 DC jack",
      "status": "diameter/polarity candidate; insertion/retention and actual harness polarity check required"
    },
    {
      "id": "N08",
      "from": "KAB-PMV3 DC matched harness",
      "to": "KAB-215v2 guide callout 2",
      "board_header_wire_count": 2,
      "status": "manufacturer accessory route; verify DC+/DC- by guide and unpowered continuity; no assumed pin number"
    },
    {
      "id": "N09",
      "from": "KAB-215v2 J2 pin 2 L OUT+",
      "to": "ND64 positive terminal",
      "cable": "included four-conductor speaker harness, selected left lead",
      "status": "amplifier pin documented; speaker-end termination unresolved"
    },
    {
      "id": "N10",
      "from": "KAB-215v2 J2 pin 4 L OUT-",
      "to": "ND64 negative terminal",
      "cable": "same harness selected left return",
      "status": "amplifier pin documented; speaker-end termination unresolved"
    },
    {
      "id": "N11",
      "from": "J2 pin 1 R OUT- and pin 3 R OUT+",
      "to": "separately insulated unused leads",
      "status": "no shared negative, parallel channel, bridge or grounding connection"
    },
    {
      "id": "N12",
      "from": "AD3 MTE scope1+/scope1-",
      "to": "driver +/driver - qualified sense test points",
      "status": "companion-governed differential measurement; neither sense lead is ground"
    }
  ],
  "speaker_output_documented_pin_map": {
    "1": "R OUT-",
    "2": "L OUT+",
    "3": "R OUT+",
    "4": "L OUT-"
  },
  "connector_orientation": "Only the manufacturer quick-start illustrated orientation and supplied harness identify physical pins. This register does not create a wire-side connector view.",
  "measurement_companion": "MEASUREMENT-INTERFACES.json (EL01 companion maintained separately)",
  "cost": {
    "currency": "USD",
    "dayton_msrp_subtotal": 90.97,
    "one_observed_cable_price": 7.16,
    "priced_core_lines_subtotal": 98.13,
    "priced_core_item_ids": [
      "E02",
      "E03",
      "E04",
      "E07"
    ],
    "complete_total": null,
    "under_1000_confirmed": false,
    "exclusions": [
      "USB audio adapter",
      "DC supply",
      "AC cord",
      "Terminations, protection, enclosure, fixtures and tools",
      "Measurement companion items",
      "Mechanical E01 assembly, PC, taxes and shipping"
    ],
    "rule": "Do not add included harnesses/kit contents or measurement companion rows twice. MSRP and retail observations are distinct, not a delivered quotation."
  },
  "calibration_gaps": [
    "At 15 V Class-D common mode, AD3 high-range per-input limits and grounding must be assessed; low range is not justified solely because the audio fundamental is small.",
    "Typical high-range accuracy of +/-100 mV plus 0.5% does not qualify precise 0.1 Vrms comparisons. Calibration/uncertainty evidence is required.",
    "Raw PWM RMS is not the modeled 20-1000 Hz sinusoidal fundamental Vrms; retain suitable acquisition/filter provenance.",
    "Current sensing/synchronous voltage-current acquisition remains unselected; voltage alone cannot establish real power or efficiency."
  ],
  "software_boundary": "Current E01 research programs solve numerical models. No calibrated DAC output, physical closed-loop controller, instrument SDK connection or automatic energization is claimed.",
  "unselected_powered_reset": [
    "Actuator with force versus stroke/speed/duty evidence",
    "Motor or solenoid driver",
    "Controller and firmware",
    "Separate release/latch actuator if needed",
    "End stops/position sensing",
    "Supply, protection and wiring",
    "Capture/release interlocks and actual cadence measurements"
  ],
  "alternative_not_included": "KAB-FC is a partial alternative to PMV3; do not buy/count both by default. It lacks the PMV3 panel, DC jack and SPST rocker.",
  "public_material": "Original factual summaries and primary links only; no manufacturer PDFs/images redistributed.",
  "mechanical_boundary": "Panel and amplifier are an external electronics module; the E01 net acoustic air volume remains unchanged. Board cover/protection, strain relief, test-point fixture and cable-entry sealing still require mechanical qualification."
}
