C02 / DUET OPEN-PATH GEOMETRY STUDY
Status: completed numerical geometry study, unbuilt; publication on HOLD.

This bounded revision addresses one concrete C07 issue: a solid carriage sat
between the nominal puck and a specimen below it. C02 supplies a real two-port
mesh and checks whether a declared rigid head envelope can pass normally through
it. This is a clearance study. It is not a complete operating exciter.

WHAT IS IN THE PACKAGE
geometry.py: original geometry construction and clearance calculations.
generate_c02.py: same-source STL/SCAD export and actual geometry illustrations.
test_geometry.py: adverse and boundary checks, not physical experiments.
parameters.json: declared dimensions and their provenance.
C02-PLAN.json: scope frozen before generation/checking.
motion-input.json: portable extract of18 selected D02 trace reports,36 sources.
prepare_motion_input.py: optional extractor if a new D02 summary is supplied.
generated-v2/: reviewed mesh exports, editable SCAD, dimensions, assembly,
exploded view, section and numerical-history overlay, plus geometry checks.
TEST-REPORT.json and TEST-LOG.txt: executed numerical geometry tests.
EXPORTED-MESH-AUDIT.json: separate re-read of the actual binary STL files.
RELEASE-MANIFEST.json: exact candidate source/evidence allowlist and hashes.

REPRODUCE IN A NEW DIRECTORY
Python3.12+, NumPy2.3.5 and Matplotlib3.11.2 were used. They are external
dependencies, not included runtime components. No prior workspace is imported.

python -m unittest discover -s . -p "test_geometry.py" -v
python generate_c02.py --output reproduced-c02

The generator refuses an existing output directory. Keep frozen generated-v2
and its manifest unchanged. PNG geometry views should reproduce with the stated
environment; SVG generation timestamps/IDs may differ. Compare geometry and
declared numerical metrics as well as exact source/input fingerprints.

The OpenSCAD file provides editable port diameter, pitch, carrier dimensions,
part selection, reference visibility and exploded arrangement. Its polygon
angles and box dimensions derive from the same definitions as the STL exporter.
OpenSCAD was not available on PATH or in the inspected Program Files locations,
and this source was not compiled with an OpenSCAD kernel. Editing SCAD directly
does not update the separate Python evidence; regenerate and recheck both.

COORDINATES AND ASSEMBLY VIEWS
Millimetres. x runs along the300mm free-span reference coupon from its clamp;
y is transverse to its120mm width; z points upward from its nominal surface.
Each STL uses part-local coordinates. The exact position of each of11 parts
is in generated-v2/concept.json. The SCAD assembly applies those transforms.
The grey coupon is a reference envelope, not a supplied physical part.

The two rails, four posts, four feet and crosshead are a geometric arrangement.
No fastener holes, joints, retention or assembly strength are specified. They
must not be sold or described as an assembly-ready instrument. An exploded
view separates parts for inspection; it is not a physical assembly procedure.

WHAT THE EXECUTED CLEARANCE MEANS
Ports are nominal42mm diameter, heads are assumed38mm circular envelopes.
An assumed0.5mm radial positioning error is charged before acceptance. The
actual faceted aperture's minimum guarded edge margin is1.488756337mm,
slightly less than the ideal-circle1.5mm. Rail/post/foot separation is checked
for a rigid, perfectly normal axial sweep. The full carrier is a closed mesh
with two holes; volume is checked against the polygon-area calculation.

The undersized37mm port must fail. Exact circular and polygon-edge tangency
are classified as touching rather than positive clearance. Tests also move a
rail/support into the path and increase positioning error; those cases fail.
These are mathematical checks of declared geometry, not manufacturing fit,
deformation, strength, tilt, friction, wear or actual guiding behavior.

HOW THE MODEL OVERLAY IS USED
The section maps CAD tip z=-1000*model striker position[m]. It shows the
selected saved t=0..0.17s range, free flight/contact/rebound included. A20mm
body height and38mm diameter are independent geometric placeholders; neither
is derived from the modeled10g mass. The snapshot input records the D02 summary
hash and all36 extracted trajectories so the plotted range can be recomputed.
All36 modeled sources still move at the saved window's end. Therefore this
envelope is NOT required total rail travel. No later stop, catching or reset
is simulated; launcher acceleration occurs before the retained t=0 state.

Both ideal R07 sources have the same axial reference contact station0.9L.
C02 draws two laterally separated ports at that x station. The1D beam does
not establish equivalence to those two physical3D contact locations. Plate
effects, torsion, real contact patches and frame dynamics need a new model
and measurements. Specimen contact is intentionally excluded from this
non-interference acceptance; no force/penetration or specimen result is claimed.

STATUS AND CONTRIBUTIONS
Research direction: Ashley Kalkowski. Original geometry, code, figures and
checks were developed with Codex computational assistance. No vendor CAD or
manufacturer drawing is reproduced in this package. No ownership, patent
novelty, exclusive rights or new blanket reuse licence is established here.
C01 remains unchanged. This separate C02 package is held for review; it does
not fulfil the later request for a complete component-based E01 exciter.
