{
  "scope": "Nominal rigid geometry and assumed positional allowance only; no load, tolerance, actuator or specimen validation.",
  "old_C07_obstruction": {
    "carriage_mm": [
      60,
      74,
      5
    ],
    "carriage_bottom_z_mm": 8,
    "head_bottom_z_mm": 13,
    "head_diameter_mm": 38,
    "entire_head_projection_inside_carriage": true,
    "normal_path_through_carriage_blocked": true,
    "axial_obstruction_thickness_mm": 5,
    "scope": "C07 plan geometry only: the solid slab under the annular puck blocks a direct normal path to a specimen beneath."
  },
  "new_geometry_checks": {
    "both_polygon_ports_have_positive_guarded_clearance": true,
    "swept_cylinders_clear_rails_in_xy_for_any_z": true,
    "swept_cylinders_clear_posts_in_x_for_any_z": true,
    "swept_cylinders_clear_feet_in_y_for_any_z": true,
    "two_guarded_head_envelopes_are_separate": true,
    "carrier_mesh_is_closed": true
  },
  "geometry_acceptance_passed": true,
  "nominal_radial_margin_mm": 2.0,
  "guarded_polygon_edge_margins_mm": [
    1.4887563370036574,
    1.4887563370036574
  ],
  "assumed_radial_position_allowance_mm": 0.5,
  "rail_xy_margin_mm": 28.5,
  "post_x_margin_mm": 24.5,
  "foot_y_margin_mm": 20.5,
  "head_to_head_guarded_margin_mm": 21.0,
  "negative_and_edge_controls": {
    "undersized_port": {
      "port_diameter_mm": 37,
      "head_diameter_mm": 38,
      "margin_mm": -0.5,
      "classification": "interference"
    },
    "exact_nominal_tangency": {
      "port_diameter_mm": 38,
      "head_diameter_mm": 38,
      "margin_mm": 0,
      "classification": "touching"
    }
  },
  "sweep_scope": "XY separation and port-edge inequalities hold for all axial positions. The displayed finite-time model path is not required travel and does not set launcher/catcher or stop dimensions.",
  "intentional_exclusion": "Specimen contact is intended; no specimen-versus-head penetration or force acceptance is inferred from this clearance test."
}
