{
  "id": "C09",
  "title": "Aperture / air-array study",
  "branch": "airborne architecture only",
  "design_question": "What packaging could expose an array aperture for future coupling measurements?",
  "mounting": "Twelve generic element envelopes on a 34 mm pitch; back plate and perimeter frame.",
  "cable_strategy": "Back-plate cable routing is undeveloped; no drive channels or phase hardware selected.",
  "nominal_contact_geometry": "Air gap only; no specimen contact. Nominal envelope array span 126 x 92 mm.",
  "limitations": [
    "No acoustic beam, laser analogy, focusing, bandwidth or sound pressure validated.",
    "Element dimensions are invented packaging placeholders, not vendor designs.",
    "Mechanical collars do not establish phase coherence or electrical feasibility."
  ],
  "parts": [
    {
      "name": "array_frame",
      "kind": "frame",
      "size_mm": [
        174,
        142,
        18,
        16,
        6
      ],
      "position_mm": [
        0,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 128,
        "triangles": 256,
        "signed_volume_mm3": 55387.676446668396,
        "bounds_mm": [
          [
            -87.0,
            -71.0,
            0.0
          ],
          [
            87.0,
            71.0,
            16.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/array_frame.stl"
    },
    {
      "name": "back_plate",
      "kind": "slab",
      "size_mm": [
        174,
        142,
        18,
        4
      ],
      "position_mm": [
        0,
        0,
        -4
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 97355.82872345041,
        "bounds_mm": [
          [
            -87.0,
            -71.0,
            0.0
          ],
          [
            87.0,
            71.0,
            4.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/back_plate.stl"
    },
    {
      "name": "collar_0_0",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        -51,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_0_0.stl"
    },
    {
      "name": "element_0_0",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        -51,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_0_1",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        -17,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_0_1.stl"
    },
    {
      "name": "element_0_1",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        -17,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_0_2",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        17,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_0_2.stl"
    },
    {
      "name": "element_0_2",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        17,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_0_3",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        51,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_0_3.stl"
    },
    {
      "name": "element_0_3",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        51,
        -34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_1_0",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        -51,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_1_0.stl"
    },
    {
      "name": "element_1_0",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        -51,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_1_1",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        -17,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_1_1.stl"
    },
    {
      "name": "element_1_1",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        -17,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_1_2",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        17,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_1_2.stl"
    },
    {
      "name": "element_1_2",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        17,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_1_3",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        51,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_1_3.stl"
    },
    {
      "name": "element_1_3",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        51,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_2_0",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        -51,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_2_0.stl"
    },
    {
      "name": "element_2_0",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        -51,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_2_1",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        -17,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_2_1.stl"
    },
    {
      "name": "element_2_1",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        -17,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_2_2",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        17,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_2_2.stl"
    },
    {
      "name": "element_2_2",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        17,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "collar_2_3",
      "kind": "ring",
      "size_mm": [
        29,
        25,
        12
      ],
      "position_mm": [
        51,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 10,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2032.4834218737685,
        "bounds_mm": [
          [
            -14.5,
            -14.5,
            0.0
          ],
          [
            14.5,
            14.5,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/collar_2_3.stl"
    },
    {
      "name": "element_2_3",
      "kind": "round",
      "size_mm": [
        24,
        9
      ],
      "position_mm": [
        51,
        34,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 18,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 4064.966843747537,
        "bounds_mm": [
          [
            -12.0,
            -12.0,
            0.0
          ],
          [
            12.0,
            12.0,
            9.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    }
  ],
  "assembly_envelope_mm": [
    174.0,
    142.0,
    20.0
  ],
  "status": "ORIGINAL_UNBUILT_GEOMETRY_CONCEPT",
  "units": "mm",
  "calibration": "none",
  "stl_scope": "individual local-coordinate parts; assemble with JSON transforms"
}
