{
  "id": "C07",
  "title": "Duet / two-head rail",
  "branch": "dual contact positioning",
  "design_question": "Can two head locations be changed while keeping a recorded baseline?",
  "mounting": "Two separate carriage pads on parallel rails; position locking remains a design task.",
  "cable_strategy": "Two independent top exits; no shared cable tension across the sample.",
  "nominal_contact_geometry": "Two 38 / 30 mm annular pad geometries; rail itself is not a specimen clamp.",
  "limitations": [
    "This is not the simulated 10 g striker system.",
    "No travel drive, timing hardware, force sensor or locking hardware is specified."
  ],
  "parts": [
    {
      "name": "front_rail",
      "kind": "slab",
      "size_mm": [
        260,
        12,
        3,
        8
      ],
      "position_mm": [
        0,
        -28,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 24776.84420067874,
        "bounds_mm": [
          [
            -130.0,
            -6.0,
            0.0
          ],
          [
            130.0,
            6.0,
            8.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/front_rail.stl"
    },
    {
      "name": "rear_rail",
      "kind": "slab",
      "size_mm": [
        260,
        12,
        3,
        8
      ],
      "position_mm": [
        0,
        28,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 24776.84420067874,
        "bounds_mm": [
          [
            -130.0,
            -6.0,
            0.0
          ],
          [
            130.0,
            6.0,
            8.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/rear_rail.stl"
    },
    {
      "name": "left_crossbar",
      "kind": "slab",
      "size_mm": [
        18,
        80,
        4,
        5
      ],
      "position_mm": [
        -115,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 7098.203472041942,
        "bounds_mm": [
          [
            -9.0,
            -40.0,
            0.0
          ],
          [
            9.0,
            40.0,
            5.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_crossbar.stl"
    },
    {
      "name": "right_crossbar",
      "kind": "slab",
      "size_mm": [
        18,
        80,
        4,
        5
      ],
      "position_mm": [
        115,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 7098.203472041942,
        "bounds_mm": [
          [
            -9.0,
            -40.0,
            0.0
          ],
          [
            9.0,
            40.0,
            5.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_crossbar.stl"
    },
    {
      "name": "left_carriage",
      "kind": "slab",
      "size_mm": [
        60,
        74,
        8,
        5
      ],
      "position_mm": [
        -60,
        0,
        8
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 8,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 21840.466392767754,
        "bounds_mm": [
          [
            -30.0,
            -37.0,
            0.0
          ],
          [
            30.0,
            37.0,
            5.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_carriage.stl"
    },
    {
      "name": "right_carriage",
      "kind": "slab",
      "size_mm": [
        60,
        74,
        8,
        5
      ],
      "position_mm": [
        60,
        0,
        8
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 8,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 21840.466392767754,
        "bounds_mm": [
          [
            -30.0,
            -37.0,
            0.0
          ],
          [
            30.0,
            37.0,
            5.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_carriage.stl"
    },
    {
      "name": "left_contact_ring",
      "kind": "ring",
      "size_mm": [
        38,
        30,
        2
      ],
      "position_mm": [
        -60,
        0,
        13
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "interface",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 853.1411894284953,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_contact_ring.stl"
    },
    {
      "name": "left_shell",
      "kind": "ring",
      "size_mm": [
        38,
        32,
        12
      ],
      "position_mm": [
        -60,
        0,
        15
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 9,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 3952.0510980878826,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_shell.stl"
    },
    {
      "name": "left_sensor_envelope",
      "kind": "round",
      "size_mm": [
        20,
        2
      ],
      "position_mm": [
        -60,
        0,
        15
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 14,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 627.3096981091877,
        "bounds_mm": [
          [
            -10.0,
            -10.0,
            0.0
          ],
          [
            10.0,
            10.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "left_lid",
      "kind": "ring",
      "size_mm": [
        38,
        6,
        2
      ],
      "position_mm": [
        -60,
        0,
        27
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 25,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2208.130137344341,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_lid.stl"
    },
    {
      "name": "left_cable_boss",
      "kind": "ring",
      "size_mm": [
        10,
        6,
        6
      ],
      "position_mm": [
        -60,
        0,
        29
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "accent",
      "role": "concept_part",
      "explode_offset_mm": 32,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 301.1086550924102,
        "bounds_mm": [
          [
            -5.0,
            -5.0,
            0.0
          ],
          [
            5.0,
            5.0,
            6.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_cable_boss.stl"
    },
    {
      "name": "right_contact_ring",
      "kind": "ring",
      "size_mm": [
        38,
        30,
        2
      ],
      "position_mm": [
        60,
        0,
        13
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "interface",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 853.1411894284953,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_contact_ring.stl"
    },
    {
      "name": "right_shell",
      "kind": "ring",
      "size_mm": [
        38,
        32,
        12
      ],
      "position_mm": [
        60,
        0,
        15
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 9,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 3952.0510980878826,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_shell.stl"
    },
    {
      "name": "right_sensor_envelope",
      "kind": "round",
      "size_mm": [
        20,
        2
      ],
      "position_mm": [
        60,
        0,
        15
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 14,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 627.3096981091877,
        "bounds_mm": [
          [
            -10.0,
            -10.0,
            0.0
          ],
          [
            10.0,
            10.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "right_lid",
      "kind": "ring",
      "size_mm": [
        38,
        6,
        2
      ],
      "position_mm": [
        60,
        0,
        27
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 25,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2208.130137344341,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_lid.stl"
    },
    {
      "name": "right_cable_boss",
      "kind": "ring",
      "size_mm": [
        10,
        6,
        6
      ],
      "position_mm": [
        60,
        0,
        29
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "accent",
      "role": "concept_part",
      "explode_offset_mm": 32,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 301.1086550924102,
        "bounds_mm": [
          [
            -5.0,
            -5.0,
            0.0
          ],
          [
            5.0,
            5.0,
            6.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_cable_boss.stl"
    }
  ],
  "assembly_envelope_mm": [
    260.0,
    80.0,
    35.0
  ],
  "status": "ORIGINAL_UNBUILT_GEOMETRY_CONCEPT",
  "units": "mm",
  "calibration": "none",
  "stl_scope": "individual local-coordinate parts; assemble with JSON transforms"
}
