{
  "id": "C06",
  "title": "Wand / hand placement",
  "branch": "contact sensing",
  "design_question": "Could a large grip make repeatable small-probe placement easier?",
  "mounting": "Hand placement for sensing only; no prescribed force or powered hammer.",
  "cable_strategy": "Rear open frame exposes cable route; no connector or electronics selected.",
  "nominal_contact_geometry": "8 mm tip, 50.3 mm2 projected area; pressure and compliance unmeasured.",
  "limitations": [
    "Hand force is a confound, not a controlled preload.",
    "Grip is a geometric concept; no ergonomic user test."
  ],
  "parts": [
    {
      "name": "grip",
      "kind": "frame",
      "size_mm": [
        112,
        42,
        18,
        22,
        4
      ],
      "position_mm": [
        0,
        0,
        8
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 128,
        "triangles": 256,
        "signed_volume_mm3": 23083.33613214837,
        "bounds_mm": [
          [
            -56.0,
            -21.0,
            0.0
          ],
          [
            56.0,
            21.0,
            22.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/grip.stl"
    },
    {
      "name": "underside",
      "kind": "slab",
      "size_mm": [
        112,
        42,
        18,
        3
      ],
      "position_mm": [
        0,
        0,
        5
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 13172.96190962033,
        "bounds_mm": [
          [
            -56.0,
            -21.0,
            0.0
          ],
          [
            56.0,
            21.0,
            3.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/underside.stl"
    },
    {
      "name": "tip",
      "kind": "round",
      "size_mm": [
        8,
        10
      ],
      "position_mm": [
        40,
        0,
        -5
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "interface",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 501.8477584873503,
        "bounds_mm": [
          [
            -4.0,
            -4.0,
            0.0
          ],
          [
            4.0,
            4.0,
            10.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/tip.stl"
    },
    {
      "name": "sensor_envelope",
      "kind": "round",
      "size_mm": [
        18,
        6
      ],
      "position_mm": [
        40,
        0,
        8
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 12,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 1524.3625664053263,
        "bounds_mm": [
          [
            -9.0,
            -9.0,
            0.0
          ],
          [
            9.0,
            9.0,
            6.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "palm_cover",
      "kind": "slab",
      "size_mm": [
        88,
        42,
        18,
        3
      ],
      "position_mm": [
        -12,
        0,
        30
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 22,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 10173.864186217745,
        "bounds_mm": [
          [
            -44.0,
            -21.0,
            0.0
          ],
          [
            44.0,
            21.0,
            3.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/palm_cover.stl"
    },
    {
      "name": "rear_open_ring",
      "kind": "frame",
      "size_mm": [
        18,
        32,
        8,
        4,
        3
      ],
      "position_mm": [
        -47,
        0,
        30
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "accent",
      "role": "concept_part",
      "explode_offset_mm": 28,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 128,
        "triangles": 256,
        "signed_volume_mm3": 914.7950643193544,
        "bounds_mm": [
          [
            -9.0,
            -16.0,
            0.0
          ],
          [
            9.0,
            16.0,
            4.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/rear_open_ring.stl"
    }
  ],
  "assembly_envelope_mm": [
    112.0,
    42.0,
    39.0
  ],
  "status": "ORIGINAL_UNBUILT_GEOMETRY_CONCEPT",
  "units": "mm",
  "calibration": "none",
  "stl_scope": "individual local-coordinate parts; assemble with JSON transforms"
}
