{
  "id": "C05",
  "title": "Crown / exciter guard",
  "branch": "contact excitation housing",
  "design_question": "Can the existing F01 exciter clearance envelope have a removable guard?",
  "mounting": "Separate outer guard and bottom ring; actuator coupling must use its own verified mount.",
  "cable_strategy": "Open centre and upper rim allow wiring; electronics are external.",
  "nominal_contact_geometry": "Guard is not the actuator contact face. Actual actuator footprint must be measured.",
  "limitations": [
    "108 mm inner diameter reuses F01 clearance intent only.",
    "No force, cooling, sound level or guard strength rating."
  ],
  "parts": [
    {
      "name": "base_ring",
      "kind": "ring",
      "size_mm": [
        120,
        108,
        4
      ],
      "position_mm": [
        0,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "interface",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 8581.59667013369,
        "bounds_mm": [
          [
            -60.0,
            -60.0,
            0.0
          ],
          [
            60.0,
            60.0,
            4.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/base_ring.stl"
    },
    {
      "name": "guard",
      "kind": "ring",
      "size_mm": [
        120,
        114,
        30
      ],
      "position_mm": [
        0,
        0,
        4
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 12,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 33027.85560544872,
        "bounds_mm": [
          [
            -60.0,
            -60.0,
            0.0
          ],
          [
            60.0,
            60.0,
            30.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/guard.stl"
    },
    {
      "name": "rim",
      "kind": "ring",
      "size_mm": [
        124,
        108,
        4
      ],
      "position_mm": [
        0,
        0,
        34
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 22,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 11642.867996906527,
        "bounds_mm": [
          [
            -62.0,
            -62.0,
            0.0
          ],
          [
            62.0,
            62.0,
            4.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/rim.stl"
    },
    {
      "name": "actuator_envelope",
      "kind": "round",
      "size_mm": [
        101,
        22
      ],
      "position_mm": [
        0,
        0,
        4
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 16,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 175977.62133632522,
        "bounds_mm": [
          [
            -50.5,
            -50.5,
            0.0
          ],
          [
            50.5,
            50.5,
            22.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    }
  ],
  "assembly_envelope_mm": [
    124.0,
    124.0,
    38.0
  ],
  "status": "ORIGINAL_UNBUILT_GEOMETRY_CONCEPT",
  "units": "mm",
  "calibration": "none",
  "stl_scope": "individual local-coordinate parts; assemble with JSON transforms"
}
