{
  "id": "C04",
  "title": "Saddle / curved specimen",
  "branch": "contact sensing",
  "design_question": "Can a removable carrier register on a round member?",
  "mounting": "Two shallow V shoes under a flat bridge; external strap not modelled.",
  "cable_strategy": "Top exit avoids the two saddle contact lines.",
  "nominal_contact_geometry": "Four V contact edges; true contact area requires curvature and deformation measurements.",
  "limitations": [
    "V geometry is a locating concept, not a universal pipe diameter fit.",
    "Mounting changes boundary conditions; no steel-beam capability established."
  ],
  "parts": [
    {
      "name": "bridge",
      "kind": "slab",
      "size_mm": [
        88,
        60,
        10,
        5
      ],
      "position_mm": [
        0,
        0,
        14
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 25856.963090306468,
        "bounds_mm": [
          [
            -44.0,
            -30.0,
            0.0
          ],
          [
            44.0,
            30.0,
            5.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/bridge.stl"
    },
    {
      "name": "shoe_a1",
      "kind": "triangle",
      "size_mm": [
        -30,
        2,
        0,
        14,
        -30,
        14,
        12
      ],
      "position_mm": [
        0,
        -8,
        0
      ],
      "rotation_deg": [
        90,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 8,
        "triangles": 12,
        "signed_volume_mm3": 2160.0,
        "bounds_mm": [
          [
            -30.0,
            2.0,
            0.0
          ],
          [
            0.0,
            14.0,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/shoe_a1.stl"
    },
    {
      "name": "shoe_a2",
      "kind": "triangle",
      "size_mm": [
        0,
        14,
        30,
        2,
        30,
        14,
        12
      ],
      "position_mm": [
        0,
        -8,
        0
      ],
      "rotation_deg": [
        90,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 8,
        "triangles": 12,
        "signed_volume_mm3": 2160.0,
        "bounds_mm": [
          [
            0.0,
            2.0,
            0.0
          ],
          [
            30.0,
            14.0,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/shoe_a2.stl"
    },
    {
      "name": "shoe_b1",
      "kind": "triangle",
      "size_mm": [
        -30,
        2,
        0,
        14,
        -30,
        14,
        12
      ],
      "position_mm": [
        0,
        20,
        0
      ],
      "rotation_deg": [
        90,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 8,
        "triangles": 12,
        "signed_volume_mm3": 2160.0,
        "bounds_mm": [
          [
            -30.0,
            2.0,
            0.0
          ],
          [
            0.0,
            14.0,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/shoe_b1.stl"
    },
    {
      "name": "shoe_b2",
      "kind": "triangle",
      "size_mm": [
        0,
        14,
        30,
        2,
        30,
        14,
        12
      ],
      "position_mm": [
        0,
        20,
        0
      ],
      "rotation_deg": [
        90,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 8,
        "triangles": 12,
        "signed_volume_mm3": 2160.0,
        "bounds_mm": [
          [
            0.0,
            2.0,
            0.0
          ],
          [
            30.0,
            14.0,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/shoe_b2.stl"
    },
    {
      "name": "head_contact_ring",
      "kind": "ring",
      "size_mm": [
        38,
        30,
        2
      ],
      "position_mm": [
        0,
        0,
        19
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "interface",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 853.1411894284953,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/head_contact_ring.stl"
    },
    {
      "name": "head_shell",
      "kind": "ring",
      "size_mm": [
        38,
        32,
        12
      ],
      "position_mm": [
        0,
        0,
        21
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 9,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 3952.0510980878826,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            12.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/head_shell.stl"
    },
    {
      "name": "head_sensor_envelope",
      "kind": "round",
      "size_mm": [
        20,
        2
      ],
      "position_mm": [
        0,
        0,
        21
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 14,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 130,
        "triangles": 256,
        "signed_volume_mm3": 627.3096981091877,
        "bounds_mm": [
          [
            -10.0,
            -10.0,
            0.0
          ],
          [
            10.0,
            10.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "head_lid",
      "kind": "ring",
      "size_mm": [
        38,
        6,
        2
      ],
      "position_mm": [
        0,
        0,
        33
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 25,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 2208.130137344341,
        "bounds_mm": [
          [
            -19.0,
            -19.0,
            0.0
          ],
          [
            19.0,
            19.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/head_lid.stl"
    },
    {
      "name": "head_cable_boss",
      "kind": "ring",
      "size_mm": [
        10,
        6,
        6
      ],
      "position_mm": [
        0,
        0,
        35
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "accent",
      "role": "concept_part",
      "explode_offset_mm": 32,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 256,
        "triangles": 512,
        "signed_volume_mm3": 301.1086550924102,
        "bounds_mm": [
          [
            -5.0,
            -5.0,
            0.0
          ],
          [
            5.0,
            5.0,
            6.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/head_cable_boss.stl"
    }
  ],
  "assembly_envelope_mm": [
    88.0,
    60.0,
    39.0
  ],
  "status": "ORIGINAL_UNBUILT_GEOMETRY_CONCEPT",
  "units": "mm",
  "calibration": "none",
  "stl_scope": "individual local-coordinate parts; assemble with JSON transforms"
}
