{
  "id": "C02",
  "title": "Leaf / slim saddle",
  "branch": "contact sensing",
  "design_question": "Can a flatter body simplify cable routing on a small coupon?",
  "mounting": "Two separate end pads under an open frame; low profile for bench handling.",
  "cable_strategy": "Open top routes cable outward; removable half covers leave a central gap.",
  "nominal_contact_geometry": "Two 15 x 26 mm rounded end pads; actual adhesive coverage is unspecified.",
  "limitations": [
    "Cover retention is not engineered.",
    "Open seams provide no dust or water protection."
  ],
  "parts": [
    {
      "name": "left_pad",
      "kind": "slab",
      "size_mm": [
        15,
        26,
        3,
        2
      ],
      "position_mm": [
        -20,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "interface",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 760.842651530807,
        "bounds_mm": [
          [
            -7.5,
            -13.0,
            0.0
          ],
          [
            7.5,
            13.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_pad.stl"
    },
    {
      "name": "right_pad",
      "kind": "slab",
      "size_mm": [
        15,
        26,
        3,
        2
      ],
      "position_mm": [
        20,
        0,
        0
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "interface",
      "role": "concept_part",
      "explode_offset_mm": 0,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 760.842651530807,
        "bounds_mm": [
          [
            -7.5,
            -13.0,
            0.0
          ],
          [
            7.5,
            13.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_pad.stl"
    },
    {
      "name": "shell",
      "kind": "frame",
      "size_mm": [
        64,
        32,
        10,
        10,
        3
      ],
      "position_mm": [
        0,
        0,
        2
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "shell",
      "role": "concept_part",
      "explode_offset_mm": 8,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 128,
        "triangles": 256,
        "signed_volume_mm3": 4919.656298729035,
        "bounds_mm": [
          [
            -32.0,
            -16.0,
            0.0
          ],
          [
            32.0,
            16.0,
            10.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/shell.stl"
    },
    {
      "name": "sensor_envelope",
      "kind": "slab",
      "size_mm": [
        24,
        16,
        2,
        3
      ],
      "position_mm": [
        0,
        0,
        2
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "proxy",
      "role": "component_envelope",
      "explode_offset_mm": 13,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 1137.768115664517,
        "bounds_mm": [
          [
            -12.0,
            -8.0,
            0.0
          ],
          [
            12.0,
            8.0,
            3.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": null
    },
    {
      "name": "left_cover",
      "kind": "slab",
      "size_mm": [
        29,
        32,
        6,
        2
      ],
      "position_mm": [
        -17.5,
        0,
        12
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 25,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 1784.212715461614,
        "bounds_mm": [
          [
            -14.5,
            -16.0,
            0.0
          ],
          [
            14.5,
            16.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/left_cover.stl"
    },
    {
      "name": "right_cover",
      "kind": "slab",
      "size_mm": [
        29,
        32,
        6,
        2
      ],
      "position_mm": [
        17.5,
        0,
        12
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "color": "dark",
      "role": "concept_part",
      "explode_offset_mm": 25,
      "geometry_check": {
        "checks": {
          "finite_vertices": true,
          "each_edge_has_two_incident_faces": true,
          "opposing_shared_edge_orientation": true,
          "nonzero_triangles": true,
          "positive_signed_volume": true
        },
        "vertices": 66,
        "triangles": 128,
        "signed_volume_mm3": 1784.212715461614,
        "bounds_mm": [
          [
            -14.5,
            -16.0,
            0.0
          ],
          [
            14.5,
            16.0,
            2.0
          ]
        ],
        "status": "PASS_GEOMETRY_ONLY"
      },
      "stl": "parts/right_cover.stl"
    }
  ],
  "assembly_envelope_mm": [
    64.0,
    32.0,
    14.0
  ],
  "status": "ORIGINAL_UNBUILT_GEOMETRY_CONCEPT",
  "units": "mm",
  "calibration": "none",
  "stl_scope": "individual local-coordinate parts; assemble with JSON transforms"
}
